- Edmonton Stock: 34
Magnetic LED Driver · 24V DC 100W · Dimmable · Axite Lighting Canada ML100S24DC
What this product is for
This magnetic LED driver converts 120V AC input to 24V DC output for compatible constant-voltage LED lighting systems. It is intended for electricians and lighting installers who need a hardwired, dimmable power supply for tape light, linear LED runs, and other 24V DC low-voltage loads.
Use for
Use for 24V DC LED strip and tape light systems, cove lighting, under-cabinet lighting, display lighting, and other compatible low-voltage LED applications where magnetic dimming is specified. It is commonly selected where a hardwired driver is preferred over plug-in power supplies.
Avoid for
Avoid for constant-current LED products, fixtures requiring 12V output, or loads that exceed the driver rating. Do not use where a non-dimmable driver is specifically required by the control scheme or where enclosure and location requirements do not match the installation.
Best for
Best for 24V DC dimmable LED installations that need a magnetic driver format and hardwired connection. For LED strip projects, a typical rule of thumb is to size the driver with spare capacity above the connected wattage to help with loading and future reliability. Actual performance depends on installation conditions, insulation, layout, dimmer compatibility, and local electrical code.
Installed in
Typically installed in residential and light commercial lighting systems, millwork lighting, display cabinets, soffits, coves, and similar concealed low-voltage lighting locations. Product literature indicates indoor/outdoor enclosure use on equivalent ML100S24DC listings; confirm site conditions and mounting method before installation.
Why this product exists
Many 24V LED systems require a stable constant-voltage DC supply and dimming compatibility with low-voltage magnetic control setups. This driver provides that conversion in a magnetic hardwire format for installers standardizing on 24V DC lighting.
Compared with similar products
Compared with smaller 24V drivers, this 100W model supports larger connected loads or longer tape-light runs. Compared with electronic drivers, magnetic drivers are often chosen when the fixture or dimming package specifically calls for magnetic low-voltage compatibility. Always verify dimmer compatibility and connected load before ordering.
Specifications
- Manufacturer part number: ML100S24DC
- Brand: Axite Lighting Canada
- Product type: Magnetic LED driver
- Input voltage: 120V AC, 60 Hz
- Output voltage: 24V DC
- Rated load: 100W listing name; supporting specification sheets for equivalent ML100S24DC references show max wattage around 96W
- Dimming: Dimmable
- Class: Class 2 on referenced catalog listings
- Approximate dimensions: 8.13 x 3.93 x 1.59 in (206 x 100 x 40 mm)
- Approximate weight: 4.3 lb (2.0 kg)
- Warranty: 5 years
- Typical application: 24V DC constant-voltage LED strip and low-voltage lighting
- Watts100W
- FinishBlack
- Mounting TypePost or Wall Mount
- Volts24V DC
- TypeMagnetic
- LocationOutdoor
- Height8.13"
- Width3.93"
- Depth1.59"
- BrandAxite Lighting Canada
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- 89 – Loyalty Rewards
- Edmonton Stock: 134
- Edmonton Stock: 396
MLE96-24DC-UD AXITE LIGHTING 96W 24V DIMMABLE 5 IN 1 LED DRIVER
MLE96-24DC-UD
Available For Backorder265 – Loyalty Rewards- Edmonton Stock: 8
- Edmonton Stock: 12
- Edmonton Stock: 5










