115 lm LED step and wall light 120V 3000K · circular face bronze finish · WAC Lighting WL-LED310-C-BZ
What this product is for
This 120V recessed step and wall light is used to mark stairs, walkways, landings, retaining walls, and low wall transitions with a soft, warm 3000K light output. The circular face and bronze-on-aluminium finish suit residential and light commercial exterior applications where a clean trim appearance is preferred.
Use for
Use for step risers, stair sidewalls, masonry or framed wall installations, pathway transition points, and architectural accent lighting where line-voltage wiring is already available. It is suitable for wet locations and is commonly selected when electricians want a compact 120V fixture without a separate low-voltage driver.
Avoid for
Avoid using this fixture as a primary area light or flood light. It is not intended to illuminate large outdoor spaces, tall landscape features, or long pathway runs by itself.
Best for
Best for residential stairs, entry steps, landscape walls, and light commercial pedestrian areas where low-level guidance lighting is needed. Typical guidance only: step lights like this are commonly spaced to mark changes in elevation rather than to fully light a walkway. Actual performance depends on installation conditions, spacing, mounting height, and local electrical code.
Installed in
Installed in interior or exterior walls and step structures using a recessed wall-box style installation. The fixture is approximately 3.5 in diameter (89 mm) and is designed for 120V direct wiring.
Why this product exists
This product provides a direct-wire 120V step and wall lighting option for projects that do not require a remote transformer. It gives controlled, low-output illumination for safer navigation while maintaining a compact architectural look.
Compared with similar products
Compared with low-voltage landscape step lights, this 120V model simplifies installation where line voltage is already present. Compared with larger wall lights, it delivers lower lumen output for wayfinding rather than broad area coverage. The bronze finish is better suited to exterior applications than decorative interior finishes.
Specifications
- Brand: WAC Lighting
- Manufacturer part number: WL-LED310-C-BZ
- Product type: LED step and wall light
- Series/family: LEDme
- Face style: Circular / full round
- Voltage: 120V AC
- Power: 3.5W to 3.9W, source-dependent listing
- Light output: 115 lm
- Colour temperature: 3000K
- CRI: 90 typical
- Finish: Bronze on aluminium
- Fixture size: approximately 3.5 in dia. (89 mm)
- Dimming: ELV dimmer compatible on distributor listings
- Location rating: Wet location rated
- Mounting: Recessed step/wall installation
- Application: Indoor/outdoor
- Volts120V
- Watts3.9W
- FinishBronze
- Light SourceLED
- Lumens115
- LED Color Temperature3000K
- DimmableYes
- MountingRecessed
- Diameter3.5"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.