- Edmonton Stock: 4
:
from
to
Clear
Clear
115 lm LED Step and Wall Light · 120V 3000K 3.9W · Full Round Brushed Nickel · WAC Lighting WL-LED310-C-BN
SKU: WL-LED310-C-BN
120V integrated LED step and wall light with 115 delivered lumens, 3000K colour temperature, 90 CRI, and a full round brushed nickel face. Suitable for recessed installation in walls or stair applications with ELV dimming to 10%; brushed nickel finish is typically intended for interior use.
What this product is for
This 120V recessed LED step and wall light is used to mark stairs, corridors, and low-level wall transitions where controlled guidance lighting is needed without excessive glare. The full round face provides a clean finished look that sits flush to the wall.
Use for
Use for interior stairways, hallways, step risers, and wall-mounted wayfinding in residential or light commercial spaces. It is also commonly used where a 120V line-voltage step light is preferred over a low-voltage system.
Avoid for
Avoid using this brushed nickel finish in exposed exterior locations unless the project documents specifically allow it. Manufacturer literature indicates the brushed nickel finish is for interior use only. Avoid using it where high-output area lighting is required, as this fixture is intended for accent and guidance lighting rather than primary illumination.
Best for
Best for electricians and contractors specifying a compact recessed step light with 3000K warm white output, 90 CRI colour rendering, and ELV dimming. It suits finished stair details and architectural wall lighting where a low-profile trim with no visible hardware is preferred.
Installed in
Installed in interior stair walls, corridor walls, and step applications using the supplied junction box for recessed mounting. Typical spacing guidance from manufacturer literature shows approximately 36 in (914 mm) between fixtures for corridor or stair wall applications and about 22 in (559 mm) for step-mount layouts, but actual spacing depends on mounting height, surface reflectance, and desired light levels.
Why this product exists
This product exists to provide low-level architectural lighting for safer navigation and cleaner visual integration than surface-mounted fixtures. It delivers approximately 115 lumens while drawing 3.9W, helping reduce energy use and lamp replacement compared with older incandescent step lights.
Typical guidance only: step lights like this are commonly used for orientation and accent lighting, not to fully light a stairwell. Actual performance depends on installation conditions, mounting location, surrounding finishes, and local electrical code.
Compared with similar products
Compared with larger wall lights, this fixture is intended for close-range step and path-of-travel illumination. Compared with low-voltage landscape step lights, this model connects to 120 VAC line voltage and is suited to projects already wired for line-voltage recessed wall fixtures. The full round trim offers a softer architectural look than louvre-style step lights.
Specifications
- Manufacturer part number: WL-LED310-C-BN
- Brand: WAC Lighting
- Product family: LEDme Full Round Step and Wall Light / WL-LED310 series
- Type: Recessed integrated LED step and wall light
- Input voltage: 120 VAC, 50/60 Hz
- Power consumption: 3.9W
- Delivered lumens: 115 lm
- Colour temperature: 3000K
- CRI: 90
- Dimming: ELV dimming, 100% to 10%
- Finish: Brushed nickel
- Construction: Die-cast corrosion-resistant aluminium alloy
- Mounting: Recessed installation with supplied junction box
- Location rating: IP66, wet location listed; brushed nickel finish noted by manufacturer for interior use only
- Rated life: 50,000 hours
- Compliance: UL, cUL, Title 24
- Approximate face size from distributor listing: 3.5 in (89 mm) round
- Volts120V
- Watts3.9W
- FinishBrushed Nickel
- Light SourceLED
- Lumens115
- LED Color Temperature3000K
- DimmableYes
- MountingRecessed
- Diameter3.5"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.