- Edmonton Stock: 17
74 lm LED step light · 120V 3000K 90 CRI · circular scoop white finish · WAC Lighting WL-LED300-C-WT
What this product is for
This 120V integrated LED step and wall light is used for low-level illumination on exterior and interior steps, stair risers, retaining walls, corridors, and pathway transitions. The circular scoop face helps direct light downward with reduced glare for safer wayfinding.
Use for
- Step and stair illumination
- Retaining walls and masonry walls
- Walkway and pathway edge lighting
- Low-level architectural accent lighting
- Indoor or outdoor wall-mount applications on 120V circuits
Avoid for
- Area lighting where higher lumen output is required
- Applications needing a replaceable lamp
- Low-voltage landscape systems without 120V supply
- Locations where a photocell or motion control is specifically required
Best for
Best for projects needing a clean flush look, low glare, and consistent 3000K illumination at steps and wall transitions. This model suits residential entries, multi-residential common areas, and light commercial pathways where a compact 120V fixture is preferred.
Installed in
Typically installed in step risers, vertical wall faces, landscape walls, and corridor walls. Suitable for Canadian indoor and outdoor applications when installed to manufacturer instructions and local code requirements.
Why this product exists
It provides dedicated low-level safety lighting without the bulk of a larger wall fixture. The integrated LED light engine, die-cast corrosion-resistant aluminium construction, and flush design help reduce maintenance while keeping the installation visually clean.
Compared with similar products
Compared with larger step lights, this fixture is intended for subtle guidance lighting rather than broad area coverage. A typical rule of thumb is that step lights in this output range are used to mark walking surfaces and transitions, not to light an entire path on their own. Actual lighting effect depends on mounting height, spacing, surface reflectance, and surrounding ambient light.
Specifications
- Product type: LED step and wall light
- Manufacturer series: LEDme Step and Wall Light
- Manufacturer part number: WL-LED300-C-WT
- Brand: WAC Lighting
- Voltage: 120 VAC, 50/60 Hz
- Delivered lumens: 74 lm
- Power: 3.9 W
- Colour temperature: 3000K
- CRI: 90
- Dimming: ELV, 100% to 10%
- Finish: White on aluminium
- Construction: Die-cast corrosion-resistant aluminium alloy
- Rated life: 50,000 hours
- Mounting style: Flush wall / step installation
- Design: Circular scoop face with no visible hardware
- Fixture linking: Up to 200 fixtures connected in parallel
- Application: Interior and exterior
- Warranty: 5-year manufacturer warranty
Buying note: for step-light layouts, spacing is typically based on stair geometry, wall height, and desired light overlap rather than a fixed distance. Actual performance depends on installation conditions, layout, and local electrical code.
- Volts120V
- Watts3.9W
- FinishWhite
- Light SourceLED
- Lumens74
- LED Color Temperature3000K
- DimmableYes
- Diameter3.5"
- RatingsIP66
- BrandWac Lighting
- Warranty5 year
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 3
- Edmonton Stock: 4
- Edmonton Stock: 9
- Edmonton Stock: 1013












