- Edmonton Stock: 7
Waterproof Wire Connectors · Black/Gray · #22 to #8 AWG · 100-Count Canister · King Innovation 61241
What this product is for
These waterproof twist-on wire connectors are used to seal outdoor copper wire splices in landscape lighting and irrigation systems. The King Innovation DryConn Black/Gray connector is supplied in a 100-count canister for service trucks, installation crews and maintenance stock.
Use for
Use for low-voltage landscape lighting connections, irrigation valve box splices, and other outdoor copper-to-copper wire terminations where moisture protection matters. The connector is commonly used on wire combinations from #22 to #8 AWG and is suitable where a sealed connector system is specified.
Avoid for
Avoid using this connector on aluminium conductors, mixed copper-to-aluminium splices, or applications outside the listed wire range. Do not use it as a substitute for selecting the correct connector size or for installations that require a different connector type under local code.
Best for
Best for contractors installing or servicing landscape lighting and irrigation systems who want a stocked canister of medium-size waterproof connectors. It is also a practical choice when one-step installation and sealed outdoor splices help reduce call-backs.
Installed in
Typically installed in landscape lighting runs, irrigation control wiring, junction points, valve boxes, and other outdoor wiring locations exposed to damp or wet conditions. For low-voltage landscape systems, a common rule of thumb is to keep voltage drop to 10% or less by matching wire size to run length. Actual performance depends on installation conditions, load, layout, and local electrical code.
Why this product exists
Outdoor splices fail when moisture enters the connection. This connector is pre-filled with non-hardening silicone sealant to help create a waterproof, corrosion-resistant splice without a multi-step sealing process. The one-step design also helps speed up repetitive field terminations.
Compared with similar products
Compared with standard dry twist-on connectors, this DryConn model is built for outdoor moisture exposure and sealed splice applications. Compared with smaller waterproof connectors, the Black/Gray version covers a broader wire range up to #8 AWG, which can be useful on heavier low-voltage landscape lighting conductors.
Specifications
- Product family: DryConn Black/Gray waterproof wire connectors
- Manufacturer: King Innovation
- Manufacturer part number: 61241
- Pack size: 100-count canister
- Wire range: #22 to #8 AWG
- Conductor type: Copper to copper
- Maximum voltage: 600 V building wire; 1000 V signs or luminaires
- Temperature rating: 221°F (105°C)
- Sealant: Pre-filled silicone, non-hardening
- Connector size: 1-19/64 in x 43/64 in (approximately 32 mm x 17 mm)
- Colour: Black/gray
- Listings: UL 486D listed; UL designation MWP
- Typical applications: Outdoor irrigation, landscape lighting, sealed outdoor splices
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 6
- Edmonton Stock: 1184
- Edmonton Stock: 760
- Edmonton Stock: 418
MT-0-BLK Axite Landscape Lighting Monet Spot Light 12V MR16 Black-Made In Canada
MT-0-BLK
160 – Loyalty Rewards- Edmonton Stock: 12
- Edmonton Stock: 3
Landscape Lighting Transformer · 150W · Black Finish · Axite FD-150-BLK
FD-150-BLK
299 – Loyalty Rewards













