- Edmonton Stock: 10
Waterproof Wire Connectors · 22-8 AWG · Black/Gray · Bag of 20 · King Innovation 61235
What this product is for
These King Innovation DryConn black/gray waterproof wire connectors are used to make sealed copper-to-copper splices in outdoor low-voltage landscape lighting, irrigation wiring and other damp or wet location connections. They are pre-filled with silicone sealant and designed for one-step installation without pre-twisting.
Use for
Use for outdoor irrigation controls, low-voltage landscape lighting systems, and other copper conductor splices where moisture protection matters. Suitable for wire combinations within the listed 22-8 AWG range.
Avoid for
Avoid using these connectors on conductor types or wire combinations outside the manufacturer’s listed range. Do not assume suitability for direct-bury or higher-voltage applications unless the installation conditions and local code match the manufacturer listing.
Best for
Best for service calls, fixture additions and landscape lighting repairs where electricians or contractors need a fast sealed splice in a compact connector. A bag of 20 is practical for small installs and maintenance stock.
Installed in
Typically installed in landscape lighting runs, irrigation valve boxes, outdoor junction points, garden lighting systems and similar exterior wiring environments. In low-voltage lighting, waterproof connectors like this are commonly chosen to reduce call-backs caused by moisture at splice points.
Why this product exists
Outdoor splices fail when moisture enters the connection. This connector combines a twist-on body with non-hardening silicone sealant to help protect the splice against water and corrosion while simplifying installation.
Compared with similar products
Compared with standard dry twist-on connectors, this product adds a factory-filled sealant for wet-location style protection. Compared with larger bulk packs, this 20-count bag is better suited to smaller jobs, service vans or testing a connector type before standardizing on larger quantities.
Typical trade guidance: for low-voltage landscape lighting, sealed connectors are commonly preferred at fixture and branch splices to help limit moisture-related failures. Actual performance depends on installation conditions, enclosure method, wire preparation and local electrical code.
Specifications
- Product family: DryConn Black Series
- Manufacturer: King Innovation
- Part number: 61235
- Connector type: Waterproof twist-on wire connector
- Colour: Black/Gray
- Pack size: 20 per bag
- Wire range: 22-8 AWG copper conductors
- Voltage rating: 600 V building wire; 1000 V signs or luminaires
- Temperature rating: 105°C (221°F)
- Connector size: approximately 1 19/64 in x 43/64 in (about 32 mm x 17 mm)
- Sealant: Pre-filled dielectric silicone, non-hardening
- Installation: One-step, no pre-twisting required
- Typical applications: Outdoor, irrigation, landscape lighting
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1
- Edmonton Stock: 383
- Edmonton Stock: 304
MT-0-BLK Axite Landscape Lighting Monet Spot Light 12V MR16 Black-Made In Canada
MT-0-BLK
Back in stock June 15th 2026105 – Loyalty Rewards- Edmonton Stock: 22
- Edmonton Stock: 1
Landscape Lighting Transformer · 150W · Black Finish · Axite FD-150-BLK
FD-150-BLK
299 – Loyalty Rewards














