- Edmonton Stock: 9
:
from
to
Clear
Clear
In-Grade Well Light · 12V MR16 Lamp-Ready · Black Composite Housing · Vista Professional Lighting CM5273-B
SKU: CM5273-B
Low-voltage in-grade well light for landscape and hardscape applications, built with a fibre-reinforced composite body and black powder-coated finish. Uses an MR16 lamp platform with a watertight lens assembly and is commonly selected for uplighting walls, trees, and architectural features where an in-ground fixture is preferred.
What this product is for
This low-voltage in-grade well light is designed for recessed outdoor landscape lighting where the fixture needs to sit at grade level. It is used to light walls, columns, planting beds, trees, and architectural features while keeping the fixture body concealed.
Use for
Use for landscape uplighting, wall grazing, feature lighting, and edge or marker-style applications where an in-ground fixture is required. The MR16 lamp platform gives installers flexibility to choose beam spread and lamp output to suit the application.
Avoid for
Avoid where a surface-mounted accent light would be easier to service, or where fixture loading and traffic conditions exceed the intended installation environment. If a fully integrated LED fixture is specifically required, confirm the exact lamping configuration before ordering.
Best for
Best for contractors and landscape installers who need a low-voltage in-ground fixture with a black finish, composite housing, and MR16 serviceability. It is a practical choice when beam selection and future lamp replacement matter.
Installed in
Typically installed in landscaped areas, planter beds, beside walkways, near retaining walls, and in exterior architectural lighting layouts. The fixture body is approximately 5 in. diameter x 6 in. high (127 x 152 mm), which helps when planning sleeve, soil, or hardscape placement.
Why this product exists
This product provides a recessed lighting option where above-grade fixtures would be visually intrusive or vulnerable to damage. The fibre-reinforced composite construction is intended for corrosion resistance and UV stability, while the sealed lens assembly helps maintain a watertight enclosure.
Compared with similar products
Compared with stake-mounted accent fixtures, an in-grade well light keeps the fixture hidden and protects the aiming point at grade level. Compared with integrated LED inground fixtures, an MR16-based design can offer simpler relamping and beam-change flexibility, depending on the lamp selected.
Typical guidance only: lower wattage landscape fixtures are commonly used for smaller trees and accent features, while beam spread selection often matters as much as lamp wattage. Actual lighting performance depends on lamp choice, aiming, spacing, surface reflectance, and site conditions.
Specifications
- Brand: Vista Professional Lighting
- Manufacturer part number: CM5273-B
- Product type: Low-voltage in-grade well light
- Series / model: 5273
- Voltage: 12V
- Lamp type: MR16
- Fixture material: Injection-moulded fibre-reinforced composite
- Finish: Black powder coat
- Lens: Tempered soda-lime glass with gasketed watertight seal
- Aiming: Adjustable lamp bracket, approximately ±25° tilt on applicable lamped versions
- Dimensions: 5 in. x 5 in. x 6 in. (127 x 127 x 152 mm) approximately
- Diameter: 5 in. (127 mm)
- Listings: cULus
- Application: Landscape and architectural in-ground lighting
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 4
- Edmonton Stock: 3
- Edmonton Stock: 1
690 lm MR16 LED bulb · 7W 2700K 60° beam · dimmable low voltage · Brilliance LED MR16-7-2700-60
MR16-7-2700-60
Available to Order | Typically Arrives in 1 - 4 Weeks From Arizona Factory in USA65 – Loyalty Rewards
