:
from
to
Clear
Clear
Barn Light Extension Arm · 16 in Pole Mount Accessory · For SECSD Dusk-to-Dawn Barn Lights · NaturaLED MT-DEA16
SKU: MT-DEA16
16 in (406 mm) extension arm pole accessory for NaturaLED SECSD dusk-to-dawn security barn lights. Use it to project the fixture away from the mounting surface for improved positioning and photocell exposure; actual light coverage depends on mounting height, layout, and site conditions.
What this product is for
The MT-DEA16 is a 16 in (406 mm) extension arm pole accessory used to mount compatible NaturaLED SECSD dusk-to-dawn security barn lights. It spaces the luminaire away from the mounting surface to help with fixture positioning in outdoor security and area-lighting applications.
Use for
Use for security barn light installations on buildings, poles, service areas, laneways, farm buildings, yards, and perimeter lighting where the fixture needs extra stand-off from the structure. It is commonly used when better fixture reach or clearer photocell exposure is needed.
Avoid for
Avoid using this accessory with non-compatible luminaires or where a direct wall mount is required. Do not assume universal fit across barn light brands or fixture families without confirming compatibility.
Best for
Best for contractors replacing or installing NaturaLED SECSD dusk-to-dawn barn lights and needing the factory accessory matched to the fixture family. A factory-matched arm can simplify fit-up compared with adapting generic hardware in the field.
Installed in
Typically installed in outdoor commercial, agricultural, industrial, and residential settings, including barns, outbuildings, loading areas, parking perimeters, and general security-lighting locations.
Why this product exists
This accessory provides approximately 16 in (406 mm) of extension so the luminaire can be positioned farther from the wall or pole face. As a rule of thumb, better fixture projection can help reduce obstruction from eaves or wall surfaces and may improve photocell operation on dusk-to-dawn fixtures. Actual performance depends on mounting height, fixture aiming, surrounding structures, and local installation conditions.
Compared with similar products
Compared with generic mounting arms, the MT-DEA16 is a manufacturer-listed accessory associated with NaturaLED SECSD security barn lights. That makes it a better choice when you want to stay with the intended fixture family and reduce compatibility guesswork.
Specifications
- Brand: NaturaLED
- Manufacturer part number: MT-DEA16
- Order code: P10054
- Product type: Extension arm pole / mounting accessory
- Length: 16 in (406 mm)
- Application: Dusk-to-dawn security barn light mounting
- Compatible family: NaturaLED SECSD security barn lights
- UPC: 844366076428
- Warranty: 5 years
- Installation location: Outdoor
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
