14000 Lm Flood/Area Light 100 Watt 4K 120/347V NaturaLED FXCAL100/840/BZ/3S/347
FXCAL100/840/BZ/3S/347
188
– Loyalty Rewards
:
from
to
Clear
Clear
Microwave Motion and Photocell Sensor · 100-277V · 0-10V Internal Control · NaturaLED SEN-MC605V-D
SKU: SEN-MC605V-D
Microwave motion and photocell sensor for 100-277V lighting systems with 0-10V internal control. Commonly used to add occupancy-based and daylight-based control to strip, vapour tight, canopy, wall pack, and similar commercial fixtures for reduced run time and energy use.
What this product is for
The NaturaLED SEN-MC605V-D is an internal microwave motion and photocell sensor used to control compatible 100-277V luminaires with 0-10V dimming control. It is intended for fixture-level lighting control where occupancy sensing and daylight response help reduce unnecessary operating hours.
Use for
Use for strip lights, vapour tight fixtures, canopies, wall packs, utility wraps, and other compatible commercial or light industrial luminaires that accept an internal 0-10V sensor accessory. Typical applications include warehouses, corridors, service areas, parking structures, and exterior building perimeters.
Avoid for
Avoid for fixtures that do not support internal sensor integration, non-dimming drivers, or control schemes that require a different sensor protocol. It is also not the right choice where a line-voltage wall sensor, networked control system, or listed outdoor stand-alone sensor head is required.
Best for
Best for retrofit or new fixture builds where electricians need one compact accessory that combines motion sensing and photocell operation. It is a practical choice when 0-10V bi-level control is preferred over simple on/off switching.
Installed in
Typically installed inside compatible luminaires. Microwave sensors can commonly detect motion through some non-metallic materials, which may help in enclosed fixture designs, but actual response depends on fixture construction, mounting height, layout, and surrounding surfaces.
Why this product exists
This sensor exists to reduce lighting run time by combining occupancy detection with daylight-based control in one accessory. For many commercial spaces, fixture-level sensing is commonly used to lower energy use and maintenance hours without adding separate wall controls.
Typical guidance only: actual performance depends on installation conditions, fixture design, obstructions, sensitivity settings, and local electrical code.
Compared with similar products
Compared with PIR sensors, a microwave sensor is commonly selected when broader detection behaviour or sensing within enclosed fixture assemblies is needed. Compared with a photocell-only accessory, this model adds occupancy response. Compared with simple on/off sensors, the 0-10V control format is typically better suited to bi-level dimming strategies on compatible LED drivers.
Specifications
- Brand: NaturaLED
- Manufacturer part number: SEN-MC605V-D
- Order code: P10234
- Product type: Microwave motion and photocell sensor
- Input voltage: 100-277V
- Control type: 0-10V internal control
- Mounting/application: Internal fixture sensor accessory
- Typical fixture families referenced by sellers/manufacturer listings: strip, vapour tight linear, canopy, utility wrap, wall pack
- Warranty: 5 years
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks