- Stock in Calgary
21000 Lm Flood Light 150/100/80/50 Watt 3/4/5K 120/277V Eiko BOX1/PS150/750/UD/BZ
BOX1/PS150/750/UD/BZ
264
– Loyalty Rewards
Flood Light Trunnion Mount Accessory · Box Series Compatibility · Adjustable Surface Mounting · EiKO BOX/TRACC
Trunnion mounting accessory for compatible EiKO BOX flood lights, used for adjustable surface mounting in outdoor flood lighting applications. Commonly selected where aiming flexibility is needed on walls, structures, or other flat mounting surfaces.
What this product is for
This trunnion accessory is a mounting component for compatible EiKO BOX series flood lights. It provides an adjustable bracket-style mounting method for surface installation where the fixture needs to be aimed after mounting.
Use for
Use for mounting compatible outdoor flood lights to building surfaces, structural members, and other flat locations where directional adjustment is required. This style of mount is commonly used for area lighting, façade lighting, security lighting, and general exterior illumination.
Avoid for
Avoid using this accessory where a slip fitter, knuckle, or other mounting method is specifically required by the pole, tenon, or fixture layout. Do not assume universal compatibility across all EiKO flood lights; confirm BOX series compatibility before ordering.
Best for
Best for electricians and contractors who need a straightforward adjustable mount for BOX flood light installations. It is a practical choice when fixture aiming needs to be set on site to suit the beam direction and mounting height.
Installed in
Typically installed in commercial exteriors, yards, service areas, loading areas, building perimeters, and other outdoor locations using flood lighting. Final suitability depends on the fixture, mounting surface, and site conditions.
Why this product exists
Flood lights are often installed where beam direction must be adjusted after the fixture is mounted. A trunnion accessory gives the installer a secure mounting point with aiming flexibility, which can simplify alignment during installation and service.
Compared with similar products
Compared with a slip fitter, a trunnion mount is typically chosen for flat surface mounting rather than pole-top or tenon applications. Compared with fixed yoke-style arrangements, a trunnion accessory is used where the compatible fixture platform and mounting method call for this specific BOX accessory. Always match the accessory to the fixture family and mounting requirement.
Specifications
- Product type: Flood light trunnion accessory
- Manufacturer part number: BOX/TRACC
- Order code: 12535
- Brand: EiKO
- Series compatibility: BOX flood light accessories
- Mounting style: Trunnion / adjustable surface mount
- Application: Outdoor flood light mounting
- Typical installation: Surface-mounted to flat structures; exact hardware and layout depend on fixture and site conditions
Typical guidance only: trunnion mounts are commonly used where on-site aiming is needed for flood coverage. Actual performance depends on fixture output, mounting height, beam pattern, installation conditions, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
100 Stocked In Calgary Warehouse As Of May 8, 2026