High Bay Refractor · 11 in Round Fixture Fit · For NaturaLED 9469 100W High Bay · NaturaLED CVR-11HBR100-PC
What this product is for
This is a replacement polycarbonate refractor for the NaturaLED 9469 100W 11 in round high bay. It is used to modify light distribution and improve visual comfort compared with the base optic alone.
Use for
Use for warehouse aisles, retail floors, gymnasiums, distribution areas, and other indoor commercial or industrial spaces where a more controlled and uniform light pattern is preferred. It is intended for compatible 11 in round HBR fixtures, specifically the NaturaLED 9469 / FX11HBR100 family.
Avoid for
Avoid ordering this as a universal reflector or lens for non-compatible high bay fixtures. Do not assume fitment for 13 in or 15 in housings, or for other brands, without confirming the mounting pattern and fixture family.
Best for
Best for contractors and maintenance teams replacing a damaged refractor or adjusting fixture output characteristics on existing NaturaLED round high bay installations. It is also a practical choice where reduced glare and more even illumination are typical project goals.
Installed in
Typically installed in warehouses, factories, retail spaces, recreation facilities, and similar high-ceiling indoor environments. Actual light distribution depends on mounting height, spacing, and the base fixture optics.
Why this product exists
High bay accessories like this refractor let buyers tune an existing luminaire for the application instead of replacing the full fixture. As a rule of thumb, optics and refractors are commonly selected to improve uniformity or reduce glare in open commercial spaces, but actual performance depends on fixture height, layout, and site conditions.
Compared with similar products
Compared with a standard lens accessory, this refractor is intended to diffuse and shape the light pattern for improved visual comfort. Compared with larger 13 in or 15 in refractors, this model is sized for the 11 in 100W round high bay family and should be selected by fixture compatibility first.
Specifications
- Brand: NaturaLED
- Manufacturer part number: CVR-11HBR100-PC
- Order code: P10376
- Product type: High bay refractor
- Material: Polycarbonate refractor body; manufacturer dimensional sheet also references aluminium on the drawing, so fitment should be verified if material is critical
- Compatible fixture: NaturaLED 9469 / FX11HBR100 11 in round high bay
- Compatible wattage: 100W fixture family
- Compatible fixture size: 11 in nominal
- Approximate dimensions from manufacturer drawing: 12.2 in OD (309 mm), 8.58 in (218 mm), 8.27 in (210 mm), 5.51 in (140 mm)
- Mounting hole details shown on drawing: 4 x 0.23 in (5.8 mm) holes
- Application: Indoor commercial and industrial high bay lighting
- BrandNaturaLED
- Warranty5 year
- Lighting Accessories
- Accessory TypeHighbay Reflector
- Nominal Size11"
- FinishPrismatic
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.