- Edmonton Stock: 295
:
from
to
Clear
Clear
White Recessed pinhole trim · 3-1/2 in with 2 in opening · white finish · Axite Lighting TL3537W
SKU: TL3537W
3-1/2 in (89 mm) recessed pinhole trim with a 2 in opening and white finish for focused accent lighting in compatible Axite replaceable-lamp housings. Commonly used where tighter glare control and a cleaner ceiling appearance are preferred over open trims.
Delivered to you by Jul 25 (Within Western Canada)
If shipping issues arise, contact us and we’ll work with the courier to keep your job on track.
What this product is for
This recessed pinhole trim is used to finish a 3-1/2 in (89 mm) recessed lighting opening and create a tighter, more controlled beam appearance at the ceiling line. The white finish helps the trim blend into white ceilings in residential and light commercial interiors.
Use for
Use for accent lighting, feature walls, niches, artwork, and other locations where a smaller visible opening is preferred. It is intended for compatible 3-1/2 in Axite recessed housings using replaceable GU10 or MR16 lamp platforms.
Avoid for
Avoid using this trim where wide beam spread is the priority, or where a wet-location shower trim or lens trim is required. Do not assume housing, lamp, or wet-location rating is included with the trim.
Best for
Best for electricians and contractors matching an existing Axite 3-1/2 in trim-and-housing system and wanting a clean white pinhole look with reduced glare compared with more open reflector trims.
Installed in
Typically installed in finished ceilings in homes, condos, retail spaces, offices, and hospitality interiors using compatible recessed housings. A pinhole trim is commonly selected where the ceiling appearance matters as much as the light effect.
Why this product exists
This trim gives specifiers and installers a way to keep the serviceability of a replaceable-lamp recessed system while achieving a more discreet ceiling aperture. Replaceable lamp systems can simplify future lamp changes compared with fully integrated fixtures, depending on the housing and lamp selected.
Compared with similar products
Compared with open reflector trims, a pinhole trim generally provides a more concealed lamp appearance and tighter visual cut-off. As typical guidance, pinhole trims are often chosen for accent-focused layouts rather than broad general lighting. Actual light output and beam spread depend on the lamp, housing, aiming, ceiling height, and installation conditions.
Specifications
- Product type: Recessed pinhole trim
- Trim size: 3-1/2 in (89 mm)
- Opening size: 2 in (51 mm)
- Finish: White
- Application: Indoor recessed downlighting
- System type: Replaceable lamp trim
- Compatible lamp platform: Typically GU10 or MR16 in compatible Axite 3-1/2 in housings
- Trade note: Confirm housing, lamp type, and ceiling compatibility before ordering
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Edmonton Stock: 1025
- Edmonton Stock: 530
- Edmonton Stock: 107
- Edmonton Stock: 502
- Edmonton Stock: 142
- Edmonton Stock: 647
- Edmonton Stock: 184
- Edmonton Stock: 538
- Edmonton Stock: 157
- Edmonton Stock: 919
- Edmonton Stock: 188
- Edmonton Stock: 120
- Edmonton Stock: 1170
- Edmonton Stock: 135
- Edmonton Stock: 199
- Edmonton Stock: 1049
- Edmonton Stock: 496
