Fixture Chain · #2 Lion Chain · Zinc-Plated Steel 100 ft · Vista LC2-100
What this product is for
This product is a #2 lion fixture chain made from zinc-plated steel for hanging indoor light fixtures and related electrical accessories. It is typically supplied in a 100 ft (30.5 m) box or roll for shop stock, fixture replacement, and field installation work.
Use for
Use for pendant fixtures, suspended luminaires, and other light-duty hanging applications where #2 fixture chain is specified. Zinc plating helps provide basic corrosion resistance for normal indoor environments.
Avoid for
Avoid using this chain for overhead lifting, rigging, fall protection, or any application requiring certified lifting chain. Also avoid using it as a substitute for engineered support hardware where fixture weight, vibration, or environmental exposure requires a listed mounting system.
Best for
Best for electricians, maintenance teams, and lighting contractors who need bulk fixture chain for indoor suspended lighting work. A 100 ft (30.5 m) box is practical for stocking service vehicles, tenant fit-ups, and routine fixture replacements.
Installed in
Typically installed in commercial interiors, utility rooms, retail spaces, workshops, and similar indoor areas where chain-hung fixtures are used. Final installation should be matched to the luminaire weight, ceiling structure, and local electrical code.
Why this product exists
Fixture chain provides a simple field-cut support method for suspended luminaires when adjustable hanging length is needed. As typical trade guidance, bulk chain is commonly chosen when installers want flexible drop lengths without ordering multiple fixed stems or rods. Actual suitability depends on fixture design, support points, and installation conditions.
Compared with similar products
Compared with jack chain, #2 lion chain is a heavier light-duty chain style commonly used where a more substantial fixture support chain is preferred. Compared with rigid stems or aircraft cable kits, chain is easier to cut and adjust on site but may not suit every architectural or engineered mounting requirement.
Specifications
- Product type: Fixture chain / mounting chain
- Trade size: #2 lion chain
- Material: Steel
- Finish: Zinc plated
- Length: 100 ft (30.5 m)
- Typical listed working load: approximately 115 lb
- Application: Indoor fixture suspension and light-duty support use
- Important note: Not for lifting applications
Working load values shown in market listings are typical guidance only and should be verified against the exact supplied product and installation method. Actual performance depends on support structure, connection hardware, layout, and local electrical code.
- Package Qty100 Feet
- BrandWhite Label
- Warranty5 year
- Lighting Accessories
- Accessory TypeMounting Chain
- Nominal Size#2
- FinishZinc Plated Steel
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.