- Edmonton Stock: 2
:
from
to
Clear
Clear
Compact Unit Heater · 240/208V 1-Phase · Multi-Watt Pic-A-Watt · King Electric KBP2406
SKU: KBP2406
Compact electric unit heater for garages, workshops and light commercial spaces, with field-selectable wattage on 240/208V single-phase power. Typical heating coverage depends on insulation, ceiling height and air leakage; a common rule of thumb is about 10 W per sq ft, so actual performance depends on installation conditions and local electrical code.
What this product is for
The King Electric KBP2406 is a compact fan-forced unit heater for garages, workshops, utility rooms and similar enclosed spaces where 240/208V single-phase electric heat is required. It is part of the KBP Series and uses King’s Pic-A-Watt field-adjustable element design so the installer can select the required wattage during installation.
Use for
Use for garage heating, shop bays, work areas, storage rooms and light commercial spaces that need ceiling or wall mounted fan-forced heat. This model is commonly chosen where a compact footprint and adjustable output help match the heater to the room and available circuit.
Avoid for
Avoid for washdown areas, corrosive environments, hazardous locations, or spaces where the heater voltage and phase do not match the supply. Do not use where local code, clearance requirements or mounting conditions are not met.
Best for
Best for electricians and contractors needing a proven compact unit heater with field-selectable output, approximately 950 to 5700 W at 240V, for garages and small commercial areas. As a typical rule of thumb, electric heat sizing is about 10 W per sq ft in insulated spaces, so this heater may suit roughly up to 570 sq ft depending on heat loss, ceiling height and layout. Actual performance depends on installation conditions, insulation, air leakage and local electrical code.
Installed in
Typically installed in residential garages, detached shops, service rooms, warehouses, maintenance spaces and light commercial work areas. Manufacturer literature indicates an approximate air throw of 12 ft (3.7 m) and an 8 ft (2.4 m) mounting height reference for the KBP2406.
Why this product exists
This heater exists to provide compact electric space heating where central heating is not practical or where zone heating is preferred. The multi-watt Pic-A-Watt design helps reduce over-sizing by allowing the installer to match output to the space and branch circuit at the time of installation.
Compared with similar products
Compared with fixed-wattage unit heaters, the KBP2406 gives more installation flexibility because wattage can be adjusted in the field. Compared with larger commercial unit heaters, it is better suited to smaller garages, workshops and utility spaces where a compact cabinet and single-phase 240/208V supply are preferred.
Specifications
- Brand: King Electric
- Manufacturer part number: KBP2406
- Series: KBP
- Product type: Compact fan-forced unit heater
- Voltage: 240/208V AC
- Phase: 1-phase
- Maximum wattage: 5700 W at 240V
- Field-selectable wattage at 240V: 5700 / 4750 / 3800 / 2850 / 1900 / 950 W
- Approximate BTU output at 240V: 19,454 to 3,242 BTU/h
- Current draw at 240V: 23.8 to 4.0 A, depending on wattage setting
- Airflow: approximately 385 CFM
- Thermostat range: approximately 47°F to 8°F (8°C to -13°C), where equipped per manufacturer configuration
- Reference air throw: 12 ft (3.7 m)
- Reference mounting height: 8 ft (2.4 m)
- Application: Garage, shop and light commercial heating
- Volts240V
- Watts5700/4750/3800/2850/1900/950
- Square Footage80-580 Sq Feet
- BrandKing Electric Heating
- Warranty5 year
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.