Infrared Patio Heater · 6000W 208V · Dual Element Almond Finish · Infratech WD-6028-SS-AL
What this product is for
This electric infrared patio heater is used to deliver directional radiant heat to larger outdoor living areas, restaurant patios, covered terraces, and similar spaces where gas piping is not preferred. It is a WD-Series dual element model rated 6000W at 208V.
Use for
Use for covered patios, hospitality seating areas, outdoor amenity spaces, and residential or light commercial installations where a long heater body and concentrated radiant output are needed. It is commonly selected where cleaner ceiling lines, flush-mount style integration, or staged heat control are part of the design.
Avoid for
Avoid using this heater where supply voltage does not match 208V, where mounting clearances cannot be maintained, or where a smaller area would be better served by a lower wattage model. For coastal or highly corrosive environments, a marine-grade version may be a better choice.
Best for
Best for electricians, contractors, and designers specifying electric outdoor comfort heat for larger zones. Dual element construction can support control strategies such as staged output or compatible custom controls, depending on the control package selected.
Installed in
Typically installed in covered exterior ceilings and overhead structures in residential backyards, condo amenities, restaurants, and commercial patio projects. The WD-Series is commonly used in applications with higher mounting positions; actual heater count and placement depend on exposure, ceiling height, and desired comfort level.
Why this product exists
This model exists for projects that need more concentrated radiant heat than smaller single-element heaters can provide. The 61 1/4 in (1556 mm) format and 6000W output suit larger coverage layouts while keeping to an electric infrared platform.
Compared with similar products
Compared with lower wattage patio heaters, this 6000W unit is intended for larger zones and heavier-duty layouts. Compared with standard stainless finish versions, this model adds an almond colour option. Compared with marine-grade models, this version uses standard corrosion-resistant stainless construction rather than upgraded 316 marine-grade material.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-6028-SS-AL
- Series: WD-Series
- Product type: Electric infrared patio heater
- Element type: Dual element
- Wattage: 6000W
- Voltage: 208V
- Current: approximately 28.8A
- Length: 61 1/4 in (1556 mm)
- Approximate dimensions: 61 1/4 x 8 x 3 in (1556 x 203 x 76 mm)
- Finish: Almond
- Base construction: 304 stainless steel platform
- Typical application: Outdoor or covered patio radiant heating
- Control compatibility: Commonly paired with on/off, duplex/stack switch, or custom control options depending on system design
- Guidance: Larger outdoor areas often require multiple heaters for even comfort. Actual performance depends on mounting height, wind exposure, ambient temperature, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.