Infrared Patio Heater · 6000W 240V 25A · Dual Element White 61-1/4 in (1556 mm) · Infratech WD-6024-SS-WH
What this product is for
This dual-element Infratech WD-Series electric infrared heater is used to warm larger patios, covered decks, outdoor dining areas, vestibules, and similar commercial or residential spaces where concentrated radiant heat is needed. The white housing suits projects where the heater should blend into light-coloured ceilings or structures.
Use for
Use for wall or ceiling-mounted outdoor heating in covered or semi-protected areas, recessed installations where permitted with the correct accessories, and projects needing a 240V heater with approximately 25A load. It is commonly selected for mounting heights around 10 to 14 ft (3.0 to 4.3 m).
Avoid for
Avoid using this heater where a lower mounting height or smaller coverage area would be more appropriate, or in fully exposed windy locations where radiant comfort will drop. Avoid assuming exact heated square footage, as infrared comfort depends heavily on wind, ambient temperature, mounting height, and placement.
Best for
Best for contractors and specifiers needing a higher-output dual-element patio heater for larger seating or standing zones, especially where a low-profile linear heater is preferred over gas-fired overhead heating.
Installed in
Typically installed in covered patios, pergolas, restaurant terraces, hospitality spaces, clubhouses, outdoor lounges, and sheltered commercial entrances. This model is also suitable for indoor or outdoor use where installation instructions and local code are followed.
Why this product exists
The WD-Series is designed to provide more concentrated radiant heat than lower-output single-element models for larger-scale coverage needs. Dual elements help deliver stronger heat density across a broader zone while keeping a slim linear form factor.
Typical buying guidance: this 6000W model is commonly used where a single smaller heater would not provide enough reach, and where mounting height is higher than many residential patio heaters. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Compared with similar products
Compared with smaller single-element heaters, this dual-element 6000W unit is better suited to larger coverage areas and higher mounting heights. Compared with marine-grade versions, this white model is intended for standard installations rather than the most corrosive coastal environments. Compared with fuel-fired patio heaters, electric infrared heat offers silent operation and no on-site combustion.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-6024-SS-WH
- Series: WD-Series
- Product type: Dual-element electric infrared patio heater
- Wattage: 6000W
- Voltage: 240V
- Current: 25A
- Length: 61-1/4 in (1556 mm)
- Approximate overall size: 61.25 x 8 x 3 in (1556 x 203 x 76 mm)
- Finish/colour: White
- Element type: Quartz
- Mounting: Wall or ceiling mount with included swivel brackets; flush mount options available by accessory
- Recommended mounting height: approximately 10 to 14 ft (3.0 to 4.3 m)
- Approximate average coverage: 11 x 11 ft (3.4 x 3.4 m)
- Use location: Indoor or outdoor use
- Listing: UL listed
- Warranty: 3-year manufacturer warranty
- Maintenance note: Heater housing and reflectors can typically be rinsed or wiped down after power is disconnected and the unit has cooled
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.