Infrared Patio Heater · 6000W 240V 25A · Dual Element Biscuit Finish · Infratech WD-6024-SS-BI
What this product is for
The Infratech WD-6024-SS-BI is a dual-element infrared radiant heater for patios, terraces, covered outdoor dining areas, and other larger spaces that need concentrated electric heat without open flame. It is a 6000W, 240V unit with a biscuit-coloured finish and a long 61-1/4 in (about 1556 mm) housing.
Use for
Use for covered patios, restaurant seating areas, pergolas, indoor/outdoor transition spaces, and similar installations where wall or ceiling mounting is practical. It is commonly selected where mounting heights are around 10 to 14 ft (3.0 to 4.3 m) and where a broader comfort zone is needed from one heater.
Avoid for
Avoid using this heater where a lower-voltage branch circuit is required, where mounting height is too low for the heater class, or where exposure conditions call for a different finish or marine-grade construction. It is also not the right choice when a smaller area can be served by a lower-wattage heater.
Best for
Best for electricians, contractors, and project buyers specifying fixed electric radiant heat for larger residential patios or light commercial outdoor seating. The dual-element WD series is commonly used where more concentrated heat and larger-scale coverage are preferred.
Installed in
Typically installed on wall or ceiling brackets, and it may also be used with compatible flush-mount options where permitted by the manufacturer. Typical mounting angle range is 0 to 60 degrees. Always confirm clearances, controls, and branch-circuit design with the installation manual and local electrical code.
Why this product exists
This model exists for projects that need stronger radiant output than smaller single-element heaters can provide. At 6000W, it is intended for larger comfort-heating zones and higher mounting applications while keeping the clean profile associated with Infratech WD-series heaters.
Typical guidance only: a 6000W patio heater is generally chosen for larger protected seating areas rather than small residential balconies. Actual performance depends on mounting height, wind exposure, ambient temperature, layout, and local electrical code.
Compared with similar products
Compared with lower-wattage single-element patio heaters, this dual-element model is better suited to larger spaces and higher mounting heights. Compared with marine-grade versions, this biscuit-finish model is intended for standard environments rather than the most corrosive coastal conditions. Compared with gas patio heaters, electric infrared heat avoids fuel storage and open flame, but requires proper 240V electrical planning and controls.
Specifications
- Manufacturer part number: WD-6024-SS-BI
- Brand: Infratech
- Product family: WD-Series dual-element infrared heaters
- Type: Electric infrared patio / radiant heater
- Power: 6000W
- Voltage: 240V
- Current draw: 25A
- Elements: Dual element
- Length: 61-1/4 in (about 1556 mm)
- Approximate overall size: 61.25 x 8 x 3 in (about 1556 x 203 x 76 mm)
- Recommended mounting height: approximately 10 to 14 ft (3.0 to 4.3 m)
- Approximate coverage area: 11 x 11 ft (3.4 x 3.4 m), depending on site conditions
- Mounting: Wall or ceiling with included mounting brackets; flush-mount options available for compatible installations
- Mounting angle: 0 to 60 degrees
- Construction note: 304 stainless steel construction is standard across the line; marine-grade 316 stainless versions are available separately for harsher environments
- Use location: Indoor or outdoor applications where installed to manufacturer requirements
- Listing: UL listed
- Element life guidance: approximately 5000 hours typical quartz element life
- Warranty: 3-year manufacturer warranty
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.