Infrared Patio Heater · 6000W 240V · Dual Element, Almond Finish · Infratech WD-6024-SS-AL
What this product is for
This electric infrared patio heater is for warming larger outdoor living, dining, and commercial seating areas where concentrated radiant heat is preferred over forced air. It is a dual-element Infratech WD-Series unit rated 6000W at 240V with an almond body finish.
Use for
Use for patios, terraces, restaurant seating areas, covered decks, hospitality spaces, and other indoor-outdoor installations where a 240V hardwired radiant heater is specified. Dual-element models are commonly selected where stronger directional heat and broader large-area coverage are needed.
Avoid for
Avoid for small enclosed rooms, low-clearance locations, or installations where the mounting height, spacing, or electrical supply does not match the manufacturer requirements. Do not select based on wattage alone without confirming placement, controls, and branch circuit design.
Best for
Best for contractors and specifiers needing a long-body 61-1/4 in (1556 mm) dual-element heater for larger zones, especially where finish coordination matters and almond is preferred over stainless appearance.
Installed in
Typically installed in covered outdoor areas, commercial patios, pergolas, soffits, and similar structures with suitable clearances and weather exposure considerations. Electricians commonly pair 6000W/240V heaters with dedicated controls and branch circuits sized for the connected load.
Why this product exists
This model exists to provide concentrated radiant comfort heat for larger spaces without moving air. Compared with lower-wattage single-element heaters, a dual-element 6000W unit is typically chosen when wall space allows a longer heater body and the project needs more output from one fixture.
Rule of thumb: on a 240V system, a 6000W heater draws approximately 25A. Actual circuiting, control method, and usable heat coverage depend on installation conditions, mounting height, wind, ambient temperature, and local electrical code.
Compared with similar products
Compared with smaller single-element patio heaters, this WD-Series dual-element model is intended for larger-scale coverage and more concentrated heat. Compared with stainless finish versions of the same heater, this SKU adds the almond body finish while keeping the same core electrical rating and form factor.
Specifications
- Manufacturer: Infratech
- Manufacturer part number: WD-6024-SS-AL
- Series: WD-Series
- Product type: Dual-element electric infrared patio heater
- Wattage: 6000W
- Voltage: 240V
- Current: 25A
- Length: 61-1/4 in (1556 mm)
- Approximate dimensions: 61.25 x 8 x 3 in (1556 x 203 x 76 mm)
- Finish/colour: Almond
- Application: Outdoor and indoor-outdoor radiant comfort heating, subject to installation requirements
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.