Dual Element Infrared Patio Heater · 4000W 208V 39 in (991 mm) · Stainless Steel · Infratech WD-4028-SS
What this product is for
This heater is for electric infrared comfort heating in outdoor and semi-outdoor spaces where concentrated radiant heat is needed without moving air. The Infratech WD-4028-SS is a dual-element 4000W unit for 208V systems, commonly selected for patios, restaurant seating areas, covered terraces, and commercial amenity spaces.
Use for
Use for covered patios, outdoor dining areas, vestibules, pergolas, loading-side staff areas, and similar spaces where people are seated or standing within the heater's intended coverage zone. The 39 in (991 mm) body suits layouts where a shorter heater is preferred but 4000W output is still required.
Typical trade guidance: a 4000W infrared heater is commonly used where stronger spot or zone heating is needed over a larger seating area than a smaller single-element unit. Actual comfort depends on mounting height, wind exposure, ambient temperature, and spacing.
Avoid for
Avoid using this heater as whole-room space heating for enclosed interiors, or in open windy locations where radiant heat will not be effectively felt by occupants. Do not assume one heater will evenly heat an entire large patio without a layout review.
Best for
Best for contractors and specifiers needing a 208V dual-element infrared heater with stainless steel housing for larger outdoor zones, especially where a compact 39 in (991 mm) length is easier to place than longer commercial heaters.
Installed in
Typically installed in covered outdoor residential and light commercial applications including patios, decks, restaurant terraces, hospitality spaces, and common areas. WD-Series heaters are commonly mounted to wall, ceiling, or pole systems using compatible mounting hardware and controls selected for the load.
Why this product exists
This model exists for projects that need more concentrated radiant output than smaller single-element heaters while keeping a shorter overall heater length. The dual-element WD-Series format is intended for larger-scale coverage needs and higher heat concentration in outdoor comfort-heating applications.
Compared with similar products
Compared with lower-wattage single-element patio heaters, this 4000W dual-element model is better suited to larger seating zones and commercial-style layouts. Compared with 240V versions of similar wattage, this specific model is intended for 208V electrical systems and draws approximately 19A, so voltage compatibility matters at the design stage.
Typical electrical buying note: continuous electric heating loads are commonly planned at 80% of breaker capacity, so control gear and branch-circuit design should be reviewed carefully. Actual performance depends on installation conditions, controls, conductor sizing, and local electrical code.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-4028-SS
- Series: WD-Series
- Product type: Dual-element electric infrared patio heater
- Rated output: 4000W
- Voltage: 208V
- Current draw: 19A
- Heater length: 39 in (991 mm)
- Finish/material: Stainless steel, 304 stainless steel housing
- Application: Outdoor / indoor approved where installed to manufacturer instructions
- Mounting: Compatible with wall, ceiling, or pole mounting systems; flush mount options are available for 39 in models with compatible accessories
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.