Dual Element Infrared Heater · 4000W 208V · 39 in with Beige Finish · Infratech WD-4028-SS-BE
What this product is for
This electric infrared radiant heater is used to warm patios, terraces, hospitality seating areas, covered outdoor spaces, and indoor commercial or residential areas where directional heat is preferred over forced air. The dual-element WD-Series format is intended for more concentrated heat output and larger-scale coverage than single-element models.
Use for
Use for covered patios, restaurant seating, vestibules, pergolas, garages, workshops, and similar spaces where a 208V electric radiant heater is specified. It is commonly selected where mounting heights are approximately 8 to 14 ft (2.4 to 4.3 m) and where wall, ceiling, or flush-mount installation may be required.
Avoid for
Avoid using this heater as a whole-room primary heating system for enclosed spaces unless the heat load has been properly calculated. It is also not the right choice where only 240V power is available and a 208V-rated heater has not been approved for that supply by the manufacturer or project engineer.
Best for
Best for electricians, contractors, and designers specifying directional radiant heat for outdoor hospitality, multi-residential amenity areas, and covered residential patios. The beige finish suits projects where a neutral architectural colour is preferred over stainless or darker finishes.
Installed in
Typically installed on walls, ceilings, or in flush-mount applications in covered outdoor living areas, restaurant patios, commercial entrances, and similar spaces. Short standoff mounting is standard, with other mounting and control accessories selected separately as required.
Why this product exists
This model provides direct infrared heat to people and surfaces instead of heating surrounding air, which is useful in drafty or semi-exposed areas. Dual elements allow more concentrated heat delivery, and Infratech control options can support staged or variable output depending on the control package used.
As a practical rule of thumb, radiant comfort coverage for this size of heater is often estimated around an 8 x 10 ft area (approximately 2.4 x 3.0 m), but actual performance depends on mounting height, ambient temperature, wind exposure, surrounding construction, and installation conditions.
Compared with similar products
Compared with single-element infrared heaters, this WD-Series dual-element unit is better suited to higher mounting heights and more concentrated directional heat. Compared with gas patio heaters, electric infrared models avoid open flame and on-site combustion, and they are commonly chosen where cleaner architectural integration and electric control options are important.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-4028-SS-BE
- Series: WD-Series
- Product type: Dual-element electric infrared radiant heater
- Wattage: 4000W
- Voltage: 208V
- Current: 19A
- Heater length: 39 in (991 mm)
- Approximate dimensions from distributor listing: 39 x 8 x 3 in (991 x 203 x 76 mm)
- Mounting height: typically 8 to 14 ft (2.4 to 4.3 m), depending on application
- Construction: 304 stainless steel body
- Finish/colour: Beige
- Installation options: Wall mount, ceiling mount, or flush mount with compatible accessories
- Application: Indoor and outdoor radiant comfort heating
- Control compatibility: Commonly paired with Infratech custom controls or duplex stack switches for staged operation
Estimated buying note: at 208V and 4000W, this heater draws about 19A, so branch circuit and control selection should be matched to continuous heating loads and local code requirements. Actual installation requirements depend on the complete system design and authority having jurisdiction.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.