Dual Element Infrared Patio Heater · 4000W 240V · 39 in Bronze Body with Stainless Trim · Infratech WD-4024-SS-BR
What this product is for
This electric infrared patio heater is used to deliver directional radiant heat to outdoor and semi-outdoor spaces such as patios, covered decks, restaurant seating areas, and hospitality spaces. The Infratech WD-4024-SS-BR is a dual-element 4000W, 240V unit in a 39 in (991 mm) housing with a bronze body and stainless steel trim.
Use for
Use for larger seating or gathering areas where stronger heat concentration is needed than a single-element heater typically provides. Common applications include covered patios, pergolas, outdoor dining areas, and commercial entrances where line-of-sight radiant heat is preferred.
Avoid for
Avoid using this heater as whole-room space heating for enclosed interiors, or where mounting height, clearance, or electrical supply does not match manufacturer requirements. It is also not the right choice where exposure conditions call for a marine-grade 316 stainless model instead of the standard corrosion-resistant construction.
Best for
Best for electricians, contractors, and property owners specifying a hardwired 240V infrared heater for upscale residential patios or light commercial outdoor areas. A typical rule of thumb is that a 4000W dual-element infrared heater is selected for larger covered zones, but actual performance depends on installation conditions, insulation, layout, and local electrical code.
Installed in
Typically installed in covered outdoor living areas, restaurant patios, hospitality venues, clubhouses, and similar spaces. This size is commonly mounted where the heater length and output suit medium-to-large seating zones and where a 240V branch circuit is available.
Why this product exists
This model exists for projects that need more concentrated radiant output and broader coverage than smaller single-element heaters. The dual-element WD-Series format is intended for larger-scale comfort heating needs while keeping the slim linear appearance expected in architectural patio heating applications.
Compared with similar products
Compared with lower-wattage single-element heaters, this 4000W dual-element unit is better suited to larger areas and higher mounting applications. Compared with standard stainless models, this version adds a bronze body with stainless trim for projects where finish coordination matters. If the site is coastal or exposed to harsher corrosive conditions, a marine-grade version may be the better specification.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-4024-SS-BR
- Series: WD-Series
- Product type: Dual-element electric infrared patio heater
- Rated output: 4000W
- Voltage: 240V
- Current: 16.7A
- Length: 39 in (991 mm)
- Construction/finish: Bronze body with stainless steel trim
- Element configuration: Dual element
- Application: Indoor/outdoor comfort heating where permitted by manufacturer instructions
- Trade note: A 4000W load at 240V draws approximately 16.7A, so branch-circuit sizing and controls should be selected to suit the connected load and local code requirements.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.