Dual-Element Infrared Patio Heater · 4000W 240V · 39 in (991 mm) Biscuit Finish · Infratech WD-4024-SS-BI
What this product is for
The Infratech WD-4024-SS-BI is a dual-element electric infrared radiant heater for outdoor patios, covered decks, hospitality spaces, and other areas where direct radiant heat is preferred over forced air. It is a 4000W, 240V WD-Series model in a biscuit body finish with a 39 in (991 mm) housing.
Use for
Use for covered patios, restaurant seating areas, pergolas, balconies, and similar residential or light commercial spaces where a concentrated heat pattern is needed. This model is commonly installed at approximately 8 to 10 ft (2.4 to 3.0 m) mounting heights and can be paired with compatible Infratech control options, including duplex/stack switch or custom controls.
Avoid for
Avoid using this heater as a whole-room indoor space heater or where exposure, clearance, or mounting conditions do not match manufacturer requirements. It is also not the right choice when a wider, softer heat pattern from a longer single-element heater is preferred.
Best for
Best for electricians, contractors, and designers specifying a compact dual-element heater for premium patio heating, recessed-style applications, or projects needing a shorter 39 in body with concentrated output. The biscuit finish can suit architectural installations where a softer body colour is preferred over stainless appearance.
Installed in
Typically installed on wall, ceiling, pole-mount, or flush-mount compatible applications, subject to the correct mounting accessories and clearances. WD-Series heaters are commonly selected for covered outdoor living areas, restaurants, hotels, and similar gathering spaces.
Why this product exists
This heater exists for projects that need stronger, more concentrated radiant heat from a shorter fixture length than many single-element models. Dual-element WD-Series heaters are intended for larger-scale coverage needs while keeping a low-profile architectural form factor.
Compared with similar products
Compared with Infratech single-element W-Series heaters, the WD-Series uses dual elements to deliver more concentrated heat and is often chosen for recessed or premium outdoor heating layouts. As a practical rule of thumb, a 4000W electric heater is commonly used where stronger spot or zone heating is needed, but actual comfort coverage depends on mounting height, wind exposure, ambient temperature, and layout.
For branch circuit planning, this heater draws 16.7A at 240V, so electricians typically place it on a properly sized 240V circuit with controls matched to the connected load and local code requirements. Continuous-load sizing, conductor selection, and overcurrent protection must be confirmed by the installer.
Specifications
- Manufacturer: Infratech
- Manufacturer part number: WD-4024-SS-BI
- Series: WD-Series
- Product type: Dual-element electric infrared radiant heater
- Wattage: 4000W
- Voltage: 240V
- Current draw: 16.7A
- Length: 39 in (991 mm)
- Finish: Biscuit
- Construction platform: Stainless steel heater body platform; standard WD-Series models are built from corrosion-resistant 304 stainless steel
- Typical mounting height: 8 to 10 ft (2.4 to 3.0 m)
- Typical coverage reference: approximately 8 x 10 ft (2.4 x 3.0 m), depending on site conditions
- Installation orientation: Wall, ceiling, pole mount, or flush mount with compatible accessories
- Application: Outdoor or indoor covered use where permitted by installation requirements
Estimated coverage and application guidance are typical trade-level references only. Actual performance depends on installation conditions, insulation, layout, wind, ambient temperature, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.