Infrared Patio Heater · 4000W 240V · Dual Element Almond 39 in (991 mm) · Infratech WD-4024-SS-AL
What this product is for
This dual-element infrared heater is designed to provide directional radiant heat for patios, terraces, restaurant seating areas, covered outdoor living spaces, and similar commercial or residential installations. It uses 4000W at 240V and is built on Infratech's WD-Series platform with an almond-coloured body.
Use for
Use for wall, ceiling, pole, or optional flush-mount installations where a low-profile heater is needed and mounting height is typically in the 8 to 12 ft (2.4 to 3.7 m) range. This model is suited to projects that need more concentrated heat than a single-element unit in a compact 39 in (991 mm) housing.
Avoid for
Avoid using this heater where line voltage, branch circuit capacity, controls, or mounting clearances do not match the installation requirements. It is also not the best choice for open, highly exposed areas where wind can reduce perceived comfort, or for corrosive coastal environments unless a marine-grade version is specified.
Best for
Best for electricians and contractors specifying outdoor comfort heat for covered patios, hospitality spaces, condo amenity areas, and upscale residential projects that need a clean appearance, dual-element output, and colour-matched finish.
Installed in
Typically installed in covered patios, pergolas, soffits, restaurant patios, terraces, and indoor/outdoor transition spaces. Infratech lists WD-Series mounting heights in the 7 to 12 ft range, with this 4000W dual-element format commonly applied around 8 to 12 ft (2.4 to 3.7 m).
Why this product exists
This heater exists for projects that need targeted radiant heat without relying on forced air or fuel-fired patio heaters. Dual quartz elements provide concentrated heat output, and the 39 in (991 mm) body helps fit installations where wall or ceiling space is limited compared with longer heater formats.
Compared with similar products
Compared with single-element W-Series models, the WD-Series provides more concentrated heat for larger seating or gathering areas. Compared with higher-wattage models, this 4000W version can be easier to place on a 240V circuit at approximately 16.7A. As a rule of thumb, continuous electric heating loads are typically sized to 80% of breaker capacity, so electricians commonly review branch circuit sizing, controls, and local code before final selection. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Specifications
- Manufacturer: Infratech
- Manufacturer part number: WD-4024-SS-AL
- Series: WD-Series
- Product type: Dual-element infrared electric patio heater
- Wattage: 4000W
- Voltage: 240V
- Current: 16.7A
- Length: 39 in (991 mm)
- Approximate product size: 39 x 8 x 3 in (991 x 203 x 76 mm)
- Body finish: Almond
- Base material: 304 stainless steel construction with colour finish
- Mounting options: Wall, ceiling, pole, or optional flush mount
- Mounting angle: 0 to 60°
- Typical mounting height: 8 to 12 ft (2.4 to 3.7 m)
- Use location: Indoor or outdoor use
- Listing: UL/cUL listed
- Heating elements: Quartz elements
- Element life: Approximately 5000 hours typical element life
- Controls: Compatible with Infratech Duplex/Stack Switch and custom control options
- Trade guidance: Commonly used where a compact dual-element heater is needed for focused comfort heat over seating zones; estimated coverage varies by height, exposure, and layout.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.