Infrared Patio Heater · 3000W 208V · Dual Element Stainless Steel · Infratech WD-3028-SS
What this product is for
This electric infrared radiant heater is used to provide directional comfort heat in outdoor and semi-outdoor areas such as patios, decks, pergolas, restaurant seating, and covered amenity spaces. The WD-Series dual-element format is intended for larger coverage needs than compact single-element models.
Use for
Use for wall, ceiling, or flush-mount style outdoor heating layouts where 208V power is available and a stainless steel housing is preferred. It is commonly selected for residential patios and light commercial hospitality spaces where faster warm-up and broader radiant coverage are needed.
Typical trade guidance: radiant patio heaters are selected by layout, mounting height, wind exposure, and occupant position rather than square footage alone. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Avoid for
Avoid using this heater as whole-room space heating for enclosed interiors, or where the supply voltage does not match 208V. It is also not the right choice where a lower-output heater is needed for very tight spaces or where line-voltage controls and branch circuit capacity have not been confirmed.
Best for
Best for electricians and contractors specifying outdoor comfort heat in covered patios, restaurant terraces, condo balconies, and similar installations requiring a 33 in (838 mm) dual-element heater with stainless steel construction.
Installed in
Typically installed in covered outdoor living areas, pergolas, verandas, hospitality seating areas, and other exposed locations where corrosion resistance matters. The heater body is approximately 33 in (838 mm) long.
Why this product exists
This model exists for projects that need more concentrated radiant output than smaller single-element heaters while keeping a relatively compact heater length. Dual elements can also support control strategies used on compatible Infratech systems, depending on the control package specified.
Compared with similar products
Compared with single-element patio heaters, this dual-element model is intended for larger-scale coverage and more even radiant distribution. Compared with higher-wattage WD-Series models, this 3000W version is a lower-load option that may suit smaller seating zones or installations with tighter circuit capacity.
Typical electrical buying note: at 3000W on 208V, the heater draws about 14.4A. For continuous-load planning, electricians commonly size branch circuits using the 80% rule, so circuit and control selection should be verified before ordering.
Specifications
- Manufacturer part number: WD-3028-SS
- Brand: Infratech
- Series: WD-Series
- Product type: Electric infrared radiant patio heater
- Wattage: 3000W
- Voltage: 208V
- Current draw: approximately 14.4A
- Element configuration: Dual element
- Finish/material: Stainless steel
- Heater length: 33 in (838 mm)
- Application: Outdoor and semi-outdoor comfort heating
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.