Dual Element Infrared Patio Heater · 3000W 208V · Bronze with Stainless Steel Trim · Infratech WD-3028-SS-BR
What this product is for
This electric infrared patio heater is designed to provide radiant heat for outdoor and semi-outdoor areas such as covered patios, restaurant seating, terraces, and similar spaces. It is an Infratech WD-Series dual element model rated 3000W at 208V with a bronze body and stainless steel trim.
Use for
Use for covered outdoor living areas, hospitality patios, condo balconies where permitted, and light commercial spaces that need directional radiant heat without fuel storage. It is commonly selected when a shorter heater length of 33 in (838 mm) is preferred over longer single-element bodies.
Avoid for
Avoid using this heater where the supply voltage does not match 208V, in enclosed hazardous locations not approved by the manufacturer, or where exposure conditions exceed the product's intended installation environment. Avoid treating estimated heated area as a guaranteed performance value.
Best for
Best for electricians, contractors, and project buyers specifying fixed electric outdoor heat with a clean architectural appearance. The dual element WD-Series format is also useful where control strategies may call for staged operation, depending on the approved control package and wiring design.
Installed in
Typically installed in covered patios, pergolas, restaurant canopies, outdoor lounges, and other sheltered gathering areas. As a rule of thumb, radiant comfort depends heavily on mounting height, wind, ambient temperature, and placement. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Why this product exists
This model exists for projects that need concentrated radiant heat from a compact dual element heater body instead of a longer single-element unit. The bronze finish with stainless steel trim is intended to suit visible architectural installations while maintaining the WD-Series form factor.
Compared with similar products
Compared with single-element patio heaters, this WD-Series dual element model uses a shorter overall body length at the same 3000W class. Compared with 240V versions, this specific model is for 208V electrical systems and should be matched to the correct supply. For outdoor electric heat, voltage and control compatibility should be confirmed before ordering.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-3028-SS-BR
- Series: WD-Series
- Product type: Dual element electric infrared patio heater
- Wattage: 3000W
- Voltage: 208V
- Current: approximately 14A
- Heater length: 33 in (838 mm)
- Finish: Bronze body with stainless steel trim
- Application: Outdoor and sheltered area radiant heating
- Installation note: Match heater voltage, controls, and branch circuit design to the project requirements and manufacturer instructions
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.