Dual Element Infrared Patio Heater · 3000W 208V · 33 in Black Housing · Infratech WD-3028-SS-BL
What this product is for
This electric infrared radiant heater is designed for indoor or outdoor comfort heating in covered patios, restaurant seating areas, terraces, and similar spaces where directional heat is preferred over forced air. It is a 3000W, 208V dual-element unit in Infratech's WD-Series with a black housing and a 33 in (838 mm) body.
Use for
Use for wall, ceiling, or pole-mounted radiant heating where a low-profile heater is needed and the installation height is typically in the 7 to 12 ft (2.1 to 3.7 m) range. This model is commonly selected for medium-size seating or standing zones and for projects using Infratech control options or half-power/full-power switching.
Avoid for
Avoid using this heater where supply voltage does not match 208V, where open exposure to severe weather is unsuitable for the installation design, or where broad-area space heating is expected like a forced-air system. It is not the right choice when a lower mounting height or a wider, softer heat pattern is the main requirement.
Best for
Best for contractors and specifiers needing concentrated radiant heat from a compact dual-element heater for hospitality, residential patio, or light commercial exterior applications. The black finish suits darker soffits, pergolas, and architectural installations where the heater should visually recede.
Installed in
Typically installed in covered patios, screened outdoor rooms, restaurant patios, club areas, balconies, and commercial entry or waiting areas. Manufacturer literature indicates WD-Series dual-element heaters are suited to installations with mounting heights up to 12 ft (3.7 m), subject to layout and local code.
Why this product exists
This model exists for projects that need more concentrated heat than a single-element unit while keeping a shorter 33 in (838 mm) form factor. Dual-element WD-Series heaters are also commonly paired with custom controls or duplex/stack switching to better match heat output to changing outdoor conditions.
Compared with similar products
Compared with single-element patio heaters, this dual-element design is intended for more intense directional heat and higher mounting applications. Compared with larger 4000W to 6000W WD-Series models, this 3000W version is a lower-load option for smaller zones or where branch circuit capacity is more limited. As a rule of thumb for electric comfort heating, outdoor performance is highly dependent on wind, ambient temperature, mounting height, and surrounding construction, so heater selection should be based on the actual site plan.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-3028-SS-BL
- Series: WD-Series
- Product type: Dual-element electric infrared radiant heater
- Application: Indoor/outdoor comfort heating
- Wattage: 3000W
- Voltage: 208V
- Current: approximately 14 to 14.4A
- Length: 33 in (838 mm)
- Finish: Black
- Base construction: 304 stainless steel body with colour finish
- Mounting: Wall, ceiling, pole, or optional flush mount frame depending on project design
- Typical mounting height: 7 to 12 ft (2.1 to 3.7 m)
- Control compatibility: Commonly used with Infratech custom controls or duplex/stack switch arrangements for staged output
- Trade note: For continuous electric heating loads, branch circuit sizing and control selection should be confirmed to suit the connected load and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.