Dual Element Infrared Patio Heater · 3000W 240V 12.5A · 33 in Stainless Steel · Infratech WD-3024-SS
What this product is for
This electric infrared patio heater is designed for outdoor comfort heating in covered patios, decks, pergolas, restaurant seating areas, and similar spaces where targeted radiant heat is preferred over forced air. The WD-3024-SS is a dual element Infratech heater rated 3000W, 240V, 12.5A in a 33 in (838 mm) stainless steel body.
Use for
Use for wall, ceiling, or flush-mount style outdoor heating layouts where a compact heater length matters. It is commonly selected for residential patios and light commercial hospitality spaces that need directional radiant heat without fuel storage or open flame.
Avoid for
Avoid using this as whole-space indoor heating or for fully exposed locations where wind quickly strips away radiant comfort. It is also not the right choice where a different voltage, longer heater body, or higher wattage coverage is required.
Best for
Best for electricians and contractors specifying a compact 240V infrared heater with dual elements, stainless steel construction, and Infratech WD-Series compatibility. This model suits projects where appearance, corrosion resistance, and focused outdoor comfort heat are key buying factors.
Installed in
Typically installed in covered patios, outdoor kitchens, screened or semi-enclosed seating areas, pergolas, balconies, and commercial terrace applications. Final placement, controls, and clearances should follow the manufacturer installation manual and local electrical code.
Why this product exists
This model provides concentrated radiant heat from a shorter 33 in (838 mm) dual element format for projects that do not have room for longer heaters. Dual element Infratech WD-Series heaters are also commonly chosen where staged or half-power/full-power control strategies may be used with compatible controls and wiring design.
Compared with similar products
Compared with single element heaters, this dual element format is commonly used where more control flexibility or a different heat pattern is desired. Compared with gas patio heaters, electric infrared units avoid combustion at the point of use and are often preferred for cleaner architectural integration. As a rule of thumb, outdoor comfort heating performance is approximate and depends on mounting height, exposure, ambient temperature, and wind conditions.
Specifications
- Manufacturer: Infratech
- Manufacturer part number: WD-3024-SS
- Series: WD-Series
- Product type: Dual element electric infrared patio heater
- Wattage: 3000W
- Voltage: 240V
- Current: 12.5A
- Heater length: 33 in (838 mm)
- Housing material/finish: Stainless steel
- Application: Outdoor radiant comfort heating
- Mounting context: Commonly used for wall, ceiling, or flush-mount compatible layouts depending on project design and accessories
Estimated application guidance only: this heater size is typically used for focused spot heating rather than broad-area heating. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.