Infrared Patio Heater · 6000W 240V 25A · Dual Element Black 61-1/4 in (1556 mm) · Infratech WD-6024-SS-BL
WD-6024-SS-BL
1532
– Loyalty Rewards
:
from
to
Clear
Clear
Infrared Dual Element Patio Heater · 3000W 240V 33 in · Black Body Stainless Steel · Infratech WD-3024-SS-BL
SKU: WD-3024-SS-BL
3000W dual-element infrared heater for 240V installations, built on Infratech’s WD-Series platform with a 33 in (838 mm) body and black finish over stainless steel construction. Commonly used for covered patios, outdoor dining areas, and commercial exterior spaces where concentrated radiant heat is preferred; actual comfort coverage depends on mounting height, wind exposure, and layout.
What this product is for
This electric infrared patio heater is designed to provide concentrated radiant heat in residential and light commercial outdoor or semi-sheltered spaces. The WD-Series dual-element format is intended for larger coverage needs than smaller single-element fixtures, while keeping a relatively compact 33 in (838 mm) heater length.
Use for
Use for covered patios, pergolas, restaurant seating areas, balconies, workshops, and other indoor or outdoor locations where 240V power is available and directional radiant heat is preferred. This model is rated 3000W at 240V and draws approximately 12.5A.
Avoid for
Avoid using this heater as whole-room space heating or in open, windy areas where radiant heat will be less effective. Do not select it where voltage, controls, mounting clearances, or environmental exposure requirements have not been confirmed against the manufacturer’s installation instructions.
Best for
Best for electricians and contractors specifying a compact dual-element infrared heater for patios and exterior gathering spaces. A practical rule of thumb is that infrared comfort heating works best when the heater is aimed at occupants rather than trying to warm the surrounding air. Actual performance depends on installation conditions, mounting height, wind, and local electrical code.
Installed in
Typically installed in covered residential patios, hospitality spaces, condo amenity areas, and commercial outdoor seating zones. The 33 in (838 mm) body can suit tighter wall or ceiling runs where longer fixtures are not ideal, provided required clearances are maintained.
Why this product exists
This model exists for projects that need more concentrated heat output than smaller single-element heaters, but in a shorter body than larger high-wattage units. The WD-Series dual-element design is used where broader radiant output and staged control options may be desirable, depending on the control package selected.
Compared with similar products
Compared with single-element infrared heaters, this dual-element WD-Series unit is intended for larger-scale coverage and more concentrated heat. Compared with longer 4000W to 6000W models, this 3000W version can be easier to place where wall space is limited or where the load needs to stay around 12.5A at 240V.
Specifications
- Brand: Infratech
- Manufacturer part number: WD-3024-SS-BL
- Series: WD-Series
- Product type: Dual-element electric infrared heater
- Wattage: 3000W
- Voltage: 240V
- Current draw: approximately 12.5A
- Heater length: 33 in (838 mm)
- Construction/finish: Stainless steel body with black body finish designation
- Application: Indoor and outdoor radiant comfort heating, subject to manufacturer installation requirements
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA