Infrared Patio Heater · 4000W 208V 61-1/4 in (1556 mm) · Single Element Bronze · Infratech W-4028-SS-BR
What this product is for
The Infratech W-4028-SS-BR is a W-Series single-element electric infrared heater for spot and zone heating in outdoor and indoor covered areas. It is built for installations where clean radiant heat, a slim profile, and 208V power are required.
Use for
Use for patios, covered decks, restaurant seating areas, hospitality spaces, vestibules, garages, workshops, and light commercial outdoor comfort heating. This model is commonly selected where a long single-element heater fits the layout better than a shorter dual-element unit.
Avoid for
Avoid using this heater as primary whole-room space heating, in fully exposed locations without considering wind loss, or where the supply voltage does not match the 208V rating. For coastal or corrosive environments, a marine-grade version may be a better choice.
Best for
Best for electricians, contractors, and specifiers needing a 4000W 208V infrared heater with a bronze body, stainless steel trim, and a long 61-1/4 in (1556 mm) format. It suits projects that need directional radiant heat with minimal clearance requirements and mounting heights typically in the 6 to 10 ft (1.8 to 3.0 m) range.
Installed in
Typically installed on wall, ceiling, or recessed mounting systems in covered residential patios, condo amenity spaces, restaurants, and commercial outdoor seating areas. As a rule of thumb, infrared comfort heating works best when the heater is aimed at occupants rather than open air. Actual performance depends on mounting height, exposure, layout, and local electrical code.
Why this product exists
This model provides targeted radiant heat from a single quartz element in a longer housing, helping designers and installers heat seating or standing zones without gas piping. The bronze finish is used where the heater needs to blend with darker architectural finishes while keeping the standard 304 stainless steel construction used in the W-Series platform.
Compared with similar products
Compared with dual-element Infratech models, this W-Series heater uses a single-element format and is typically chosen for slimmer linear layouts and mounting heights up to about 10 ft (3.0 m). Compared with marine-grade versions, this standard model uses 304 stainless steel construction rather than upgraded 316 stainless steel for harsher coastal conditions.
Specifications
- Brand: Infratech
- Manufacturer part number: W-4028-SS-BR
- Series: W-Series
- Heater type: Electric infrared radiant heater
- Element configuration: Single element
- Rated power: 4000W
- Voltage: 208V
- Current: 19A
- Fixture length: 61-1/4 in (1556 mm)
- Construction: 304 stainless steel
- Finish: Bronze body with stainless steel trim
- Typical mounting height: 6 to 10 ft (1.8 to 3.0 m)
- Mounting options: Surface or recessed mounting, depending on project design and accessories
- Application: Indoor or outdoor use
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.