Infrared Patio Heater · 4000W 240V · Single Element, Beige Stainless Steel · Infratech W-4024-SS-BE
What this product is for
The Infratech W-4024-SS-BE is a single-element electric infrared patio heater for indoor or outdoor comfort heating. It is designed to deliver radiant heat directly to people and surfaces rather than heating large volumes of air, which makes it a common choice for covered patios, restaurant seating areas, pergolas, garages, and similar semi-exposed spaces.
Use for
- Covered patios and outdoor living areas
- Restaurant and hospitality seating zones
- Indoor work or waiting areas needing directional radiant heat
- Wall or ceiling mounted installations where a long single-element heater fits the layout
Avoid for
- Applications needing whole-room air heating instead of directional radiant heat
- Open, windy locations where heat retention is limited
- Installations without suitable 240V branch circuit capacity and mounting clearances
Best for
Best for electricians and contractors specifying a 240V radiant heater for outdoor or semi-outdoor spaces where silent operation, no moving parts, and a clean architectural finish matter. The 61.25 in (1556 mm) body suits longer mounting zones and linear patio layouts.
Installed in
Typically installed on patios, under covered decks, in pergolas, outdoor dining areas, garages, workshops, and other sheltered commercial or residential spaces. This model is commonly wall- or ceiling-mounted, subject to manufacturer instructions and local code.
Why this product exists
This heater exists for projects where gas heating is not desired and where direct radiant comfort heat is preferred. Electric infrared heaters like this are commonly selected for clean operation, silent performance, and simplified maintenance compared with fuel-fired alternatives.
Compared with similar products
Compared with dual-element patio heaters, this single-element model offers a longer, slimmer heater body and straightforward on/off heating from one element. Compared with lower-wattage units, 4000W is typically chosen for larger seating zones or higher mounting conditions. As a rule of thumb, radiant heater performance is strongly affected by wind, mounting height, and enclosure, so layout should be reviewed before final selection.
Specifications
- Brand: Infratech
- Manufacturer part number: W-4024-SS-BE
- Product family: W-Series single-element heater
- Heater type: Electric infrared patio heater
- Element configuration: Single element
- Power: 4000W
- Voltage: 240V
- Current: 16.7A
- Length: 61.25 in (1556 mm)
- Approximate dimensions: 61.25 x 8 x 3 in (1556 x 203 x 76 mm)
- Finish: Beige
- Construction: Stainless steel housing
- Mounting: Wall or ceiling mount, per manufacturer instructions
- Use location: Indoor / outdoor
- Listing: UL listed
Typical buying guidance only: a 4000W 240V heater draws about 16.7A, and fixed electric heating is commonly treated as a continuous load, so branch circuit sizing and controls should be confirmed to local electrical code and the full installation manual. Actual performance depends on installation conditions, insulation, layout, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.