Infrared Patio Heater · 3000W 208V · Single Element Bronze with Stainless Steel Trim · Infratech W-3028-SS-BR
What this product is for
This electric infrared radiant heater is used to warm occupied outdoor and semi-sheltered spaces such as patios, terraces, restaurant seating areas, and covered decks. It is a W-Series single-element unit rated 3000W at 208V with a bronze body and stainless steel trim.
Use for
Use for residential and light commercial outdoor heating where quiet operation, directional heat, and a clean wall or ceiling-mounted appearance are required. Suitable for patios, pergolas, covered balconies, and outdoor amenity areas when installed to manufacturer instructions and local code.
Avoid for
Avoid using this heater as whole-room indoor space heating or in open, highly exposed areas where wind quickly strips away radiant comfort. Do not select it without confirming voltage, mounting clearances, controls, and branch circuit capacity.
Best for
Best for projects needing a 208V single-element infrared heater in a longer 61.25 in (1556 mm) format with bronze finish for architectural outdoor spaces. Also a fit where the spec calls for Infratech W-Series construction and finish continuity across multiple heaters.
Installed in
Typically installed in covered patios, outdoor kitchens, restaurant patios, condo amenity spaces, cabanas, and similar exterior applications. Electricians commonly pair this type of heater with dedicated controls and a properly sized 208V circuit.
Why this product exists
Infrared patio heaters are chosen when the goal is to warm people and surfaces directly instead of heating large volumes of outdoor air. A 3000W 208V single-element model is commonly selected where moderate radiant output is needed and available wall or ceiling space suits a 61.25 in (1556 mm) heater body.
As a rule of thumb, 208V systems deliver lower output than equivalent 240V heater ratings, so matching the heater to the actual site voltage matters. Actual performance depends on mounting height, exposure, layout, and local electrical code.
Compared with similar products
Compared with higher-wattage or dual-element patio heaters, this single-element 3000W model is typically used for smaller coverage zones or where wall space and electrical capacity are more limited. Compared with gas patio heaters, electric infrared units avoid on-site combustion and provide directional radiant heat without an open flame.
Compared with stainless-only versions, this model adds a bronze body with stainless steel trim for a different architectural finish while keeping the same core W-Series heater format.
Specifications
- Manufacturer part number: W-3028-SS-BR
- Brand: Infratech
- Series: W-Series
- Product type: Single-element electric infrared patio heater
- Rated power: 3000W
- Voltage: 208V
- Current: 14A
- Length: 61.25 in (1556 mm)
- Approximate dimensions: 61.25 x 8 x 3 in (1556 x 203 x 76 mm)
- Finish: Bronze body with stainless steel trim
- Application: Outdoor / patio radiant heating
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.