Single Element Infrared Patio Heater · 3000W 208V · Biscuit Finish · Infratech W-3028-SS-BI
What this product is for
This Infratech W-Series single-element infrared heater is used to add directional radiant heat to patios, covered decks, outdoor dining areas, vestibules, and similar residential or light commercial spaces. It is a 3000W, 208V model in a biscuit finish with a 61-1/4 in (about 1556 mm) body length.
Use for
Use where you need focused overhead or wall-mounted radiant heat without fuel lines or open flame. Common applications include covered patios, restaurant seating areas, outdoor kitchens, and sheltered work or waiting areas. Typical guidance from distributor listings places this size heater at about an 8 x 8 ft (2.4 x 2.4 m) coverage zone when installed at the recommended height.
Avoid for
Avoid using this heater as a whole-room space-heating substitute or where broad-area convection heat is expected. It is also not the best choice for highly exposed locations with strong wind unless the layout and mounting plan are designed around heat loss.
Best for
Best for electricians, contractors, and property owners specifying a fixed 208V infrared heater for covered outdoor comfort heating with a clean architectural appearance. The biscuit finish suits projects where stainless steel is not the preferred visible finish.
Installed in
Typically installed on walls or ceilings in covered exterior spaces and some indoor commercial or hospitality settings. Trade guidance from product listings indicates a common mounting height of about 7 to 9 ft (2.1 to 2.7 m), with mounting angles from 0 to 60 degrees depending on layout and throw.
Why this product exists
This model provides targeted radiant comfort heat from a single-element W-Series body where 208V power is available. It gives specifiers a longer 61-1/4 in format with a standard colour finish option, while keeping installation simpler than gas-fired patio heating in many projects.
Compared with similar products
Compared with smaller W-Series heaters, this 3000W model is suited to larger seating or standing zones. Compared with dual-element models, it uses a single-element format and lower total wattage. Compared with 240V versions, this 208V model must be matched to the actual supply voltage on site. Actual comfort performance depends on mounting height, clearance, wind, ambient temperature, and local electrical code.
Specifications
- Brand: Infratech
- Manufacturer part number: W-3028-SS-BI
- Series: W-Series
- Heater type: Single-element infrared patio heater
- Rated power: 3000W
- Voltage: 208V
- Current: 14A
- Finish: Biscuit
- Base construction: 304 stainless steel platform
- Length: 61-1/4 in (about 1556 mm)
- Approximate body dimensions from comparable W-Series listings: 61-1/4 in x about 8 in x 3 in (1556 x about 203 x 76 mm)
- Typical mounting height guidance: 7 to 9 ft (2.1 to 2.7 m)
- Typical coverage guidance: approximately 8 x 8 ft (2.4 x 2.4 m)
- Element life guidance from distributor listing: approximately 5,000 hours
- Warranty: 3-year manufacturer warranty
- Origin: Made in USA
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.