Infrared Patio Heater · 3000W 240V · Single Element Stainless Steel · Infratech W-3024-SS

What this product is for

This electric infrared patio heater is used to provide directional radiant heat to outdoor living areas, restaurant patios, covered decks, and other spaces where occupants need heat at the seating zone rather than bulk air heating. The W-Series single-element format is suited to applications that benefit from a longer heater body at 61-1/4 in (1.56 m).

Use for

Use for residential patios, pergolas, covered balconies, outdoor dining areas, and light commercial hospitality spaces requiring 3000W at 240V. This model is commonly selected when a stainless steel finish is preferred and where a single-element heater fits the layout and control strategy.

Avoid for

Avoid using this heater where the supply voltage does not match 240V, where local clearances cannot be maintained, or where the installation is fully exposed without following manufacturer guidance for location and mounting. It is also not the right choice when a shorter dual-element body is required for limited mounting space.

Best for

Best for electricians and contractors specifying a hardwired radiant heater for covered outdoor comfort zones, especially where a longer heater body can spread warmth across seating or standing areas. Typical buying considerations include available wall or ceiling length, control compatibility, and branch-circuit capacity.

Installed in

Typically installed in covered outdoor residential and commercial areas, including patios, verandas, restaurants, clubs, and hospitality spaces. Final installation method, mounting height, and controls should follow the manufacturer instructions and local electrical code in Canada.

Why this product exists

Infrared patio heaters like this are used where forced-air or convection heat is less effective outdoors. Instead of heating the surrounding air, the heater directs radiant energy toward people and surfaces in the occupied zone, which is generally more practical in breezy outdoor environments.

As a rule of thumb, a 3000W electric radiant heater is commonly used for small to mid-sized outdoor seating zones, but actual coverage is estimated only and depends on mounting height, exposure, wind, ambient temperature, and layout.

Compared with similar products

Compared with dual-element Infratech models at the same wattage, this single-element W-Series heater uses a longer body length of about 61-1/4 in (1.56 m), which can suit layouts where linear coverage matters more than a shorter fixture footprint. Compared with lower wattage patio heaters, 3000W is a common step up for larger comfort zones or more challenging outdoor conditions.

At 240V and 12.5A, the connected load is below the 16A continuous-load guideline of a 20A circuit, but branch-circuit sizing, controls, disconnecting means, and installation details must be confirmed by the installer and local code requirements.

Specifications

• Brand: Infratech
• Manufacturer part number: W-3024-SS
• Series: W-Series
• Product type: Single-element electric infrared heater
• Rated power: 3000W
• Voltage: 240V
• Current: 12.5A
• Construction/finish: Stainless steel
• Heater length: 61-1/4 in (1.56 m)
• Application: Indoor or outdoor use where permitted by manufacturer instructions
• Installation: Hardwired radiant heater for wall or ceiling mounting, subject to approved accessories and clearances

Estimated application guidance is provided for buying support only. Actual performance depends on installation conditions, mounting height, wind exposure, insulation, layout, and local electrical code.