Infrared Patio Heater · 3000W 240V Single Element Black · 61-1/4 in (1.56 m) W-Series · Infratech W-3024-SS-BL

What this product is for

This Infratech W-Series single-element electric infrared heater is used to provide directional comfort heat in outdoor and semi-protected spaces such as patios, terraces, restaurant seating areas, and covered amenity areas. It is a 3000W, 240V unit with a black body finish and a 61-1/4 in (1.56 m) heater length.

Use for

Use for wall, ceiling, pole, or flush-mount installations where a low-profile radiant heater is preferred. It is commonly selected for residential patios and light commercial outdoor seating where electricians and contractors need a fixed 240V heater drawing 12.5A.

Typical guidance: single-element 3000W infrared heaters are often chosen for focused spot-heating rather than whole-space heating. Actual comfort coverage depends on mounting height, layout, wind, ambient temperature, and whether the area is protected.

Avoid for

Avoid using this heater where broad-area heat coverage is required from one fixture, or where the installation height and exposure conditions call for a higher-output or dual-element model. Avoid assuming exact heated square footage in open or windy locations.

Best for

Best for projects needing a clean architectural look, directional radiant heat, and multiple mounting options. This model suits covered patios, condo balconies where permitted, hospitality seating areas, and similar applications where a black finish blends into darker ceilings or structures.

Installed in

Typically installed in covered outdoor living areas, restaurant patios, pergolas, soffits, and other residential or light commercial exterior spaces. Manufacturer guidance indicates W-Series mounting heights between 6 ft and 10 ft (1.8 to 3.0 m), with minimum clearances from combustibles of 6 in (15.2 cm) behind, 18 in (45.7 cm) from sides and ends, and 36 in (91.4 cm) in front.

Why this product exists

This product exists for projects that need electric infrared comfort heat without gas piping, visible flame, or bulky equipment. The W-Series is designed as a low-profile single-element heater with corrosion-resistant stainless steel construction and finish options for architectural coordination.

Compared with similar products

Compared with dual-element patio heaters, this single-element model is typically used for more focused heat and simpler layouts. Compared with portable heaters, it is intended for permanent installation and cleaner integration into the space. Compared with higher-wattage models, 3000W is a common mid-range choice when wall space and circuit loading need to stay moderate.

Rule of thumb for circuit planning: at 240V and 3000W, the heater draws 12.5A. For continuous-load planning, electricians typically size branch circuits at 125% of load, so installation requirements should be confirmed against local code, controls, and the full connected load.

Specifications

• Brand: Infratech
• Manufacturer part number: W-3024-SS-BL
• Series: W-Series
• Product type: Electric infrared patio heater
• Element type: Single element
• Rated power: 3000W
• Voltage: 240V
• Current draw: 12.5A
• Finish: Black
• Construction base model: Stainless steel body platform with black finish option
• Length: 61-1/4 in (1.56 m)
• Mounting options: Wall, ceiling, pole, or flush mount with compatible accessories
• Recommended mounting height: 6 to 10 ft (1.8 to 3.0 m)
• Minimum clearance behind: 6 in (15.2 cm)
• Minimum clearance from sides and ends: 18 in (45.7 cm)
• Minimum clearance in front: 36 in (91.4 cm)
• Listing: UL/CUL listed family per manufacturer literature

Estimated application note: in protected spaces, comfort coverage is commonly better than in exposed areas. Actual performance depends on installation conditions, insulation, layout, controls, wind, and local electrical code.