Single Element Infrared Patio Heater · 3000W 240V · Almond Finish · Infratech W-3024-SS-AL
What this product is for
This electric infrared patio heater is designed for surface-mounted outdoor comfort heating in residential and light commercial spaces. It is a 3000W, 240V single element unit in Infratech's W-Series with an almond body finish.
Use for
Use for covered patios, terraces, restaurant seating areas, screened outdoor spaces, and similar locations where directional radiant heat is preferred over forced air. It is commonly selected where a long single element heater format suits the mounting layout.
Avoid for
Avoid using this heater where supply voltage does not match 240V, where mounting clearances cannot be maintained, or in applications requiring broad-area space heating like a forced-air system. It is not a substitute for whole-room heating in open, windy areas.
Best for
Best for electricians and contractors specifying hardwired outdoor electric heat with a clean fascia and directional radiant output. This model is a practical fit when a single element heater is preferred and the project calls for an almond-coloured housing.
Installed in
Typically installed on patios, pergolas, covered decks, hospitality seating areas, and exterior commercial gathering spaces. The heater body is approximately 61.25 in long (1556 mm), 8 in wide (203 mm), and 3 in high (76 mm), so layout and clearance planning matter during rough-in and final placement.
Why this product exists
This model provides targeted radiant heat without moving air, making it useful where occupants need direct warmth in outdoor or semi-sheltered spaces. At 3000W on 240V, it draws 12.5A, which helps with branch-circuit planning for dedicated heater loads.
Typical guidance only: for fixed electric heating loads, continuous-load sizing is commonly planned at 125% of running current. Actual circuit design, conductor sizing, controls, and overcurrent protection must follow the Canadian Electrical Code and site conditions.
Compared with similar products
Compared with lower-wattage patio heaters, a 3000W model is commonly chosen when more output is needed for a larger seating zone or higher mounting condition. Compared with dual element models, this single element format offers a longer body style and a simpler heater configuration. If the project requires different zoning, shorter body length, or staged output, another series may be a better fit.
Specifications
- Brand: Infratech
- Manufacturer part number: W-3024-SS-AL
- Series: W-Series
- Product type: Single element electric infrared patio heater
- Input voltage: 240V
- Power: 3000W
- Current draw: 12.5A
- Finish: Almond
- Approximate dimensions: 61.25 in L x 8 in W x 3 in H (1556 mm x 203 mm x 76 mm)
- Mounting style: Surface-mounted patio heater
- Application: Outdoor and other suitable covered-area comfort heating, subject to manufacturer installation requirements
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.