Single-Element Infrared Patio Heater · 2000W 208V · White 39 in (991 mm) · Infratech W-2028-SS-WH
What this product is for
This Infratech W-Series single-element infrared patio heater is designed for outdoor and indoor locations where direct radiant heat is preferred over forced air. It is commonly specified for covered patios, pergolas, balconies, restaurant seating areas, and similar spaces using a 208V supply.
Use for
Use where you need focused comfort heat in a compact 39 in (991 mm) heater body. It suits residential patios and light commercial seating areas, especially where electricians or contractors need a clean linear heater with surface or recessed mounting options.
Typical guidance: W-Series single-element heaters are commonly mounted at 6 to 10 ft (1.8 to 3.0 m). In protected areas they may feel warmer than average, while windy or exposed installations may require additional heater capacity. Actual performance depends on installation conditions, layout, and local electrical code.
Avoid for
Avoid using this heater where a 240V model is required, where broad-area heat coverage is needed from a single fixture, or where the installation is fully exposed to heavy wind and weather without considering additional heater quantity or placement. Do not treat estimated comfort coverage as a guaranteed heated area.
Best for
Best for contractors and specifiers selecting a 208V single-element radiant heater for smaller outdoor zones, seating areas, and wall or ceiling-mounted applications where a white finish better matches the surrounding surface.
Installed in
Typically installed in covered patios, outdoor dining areas, verandas, pergolas, screened spaces, garages, and other residential or commercial locations where radiant heat is directed toward occupants. This model is also compatible with 39 in W-Series flush-mount accessories where the installation design calls for a recessed appearance.
Why this product exists
This product provides targeted electric infrared heat without moving air, making it useful where gas piping is not desired or where a clean electric installation is preferred. The W-Series format gives specifiers a single-element option in a compact 39 in (991 mm) length for 208V projects.
Compared with similar products
Compared with higher-wattage or dual-element patio heaters, this 2000W single-element model is better suited to smaller zones and lower heat demand. Compared with 240V versions, this unit is specifically matched to 208V electrical systems. Compared with decorative freestanding heaters, it is intended for fixed installation and more controlled heat placement.
Specifications
- Brand: Infratech
- Manufacturer part number: W-2028-SS-WH
- Series: W-Series
- Heater type: Single-element electric infrared patio heater
- Rated power: 2000W
- Voltage: 208V
- Current: 10A
- Length: 39 in (991 mm)
- Approximate overall size: 39 x 8 x 3 in (991 x 203 x 76 mm)
- Finish: White body
- Construction: 304 stainless steel
- Typical mounting height: 6 to 10 ft (1.8 to 3.0 m)
- Mounting options: Surface mount or recessed/flush mount with compatible 39 in frame
- Application: Residential and commercial outdoor comfort heating
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.