Infrared Patio Heater · 2000W 208V · Single Element, Almond Finish · Infratech W-2028-SS-AL
What this product is for
This single-element electric infrared heater is designed for spot and zone heating in outdoor living areas and other spaces where direct radiant heat is preferred over forced air. It is part of Infratech’s W-Series and is built for wall, ceiling, or recessed mounting in suitable installations.
Use for
Use for patios, pergolas, covered decks, restaurant seating areas, entrances, and light commercial outdoor comfort heating. It is commonly selected where a 208V supply is available and a narrower 39 in (991 mm) heater length fits the layout.
Avoid for
Avoid using this heater as whole-room space heating for large enclosed areas or where broad ambient heating is required. It is not the right choice when a wider coverage pattern, higher wattage, or dual-element control is needed.
Best for
Best for targeted heat over seating, dining, and work areas where clean electric infrared heat is needed without open flame. The almond finish can also suit projects where the heater body needs to blend with lighter soffits or architectural finishes.
Installed in
Typically installed on walls, ceilings, or in recessed applications in residential and commercial settings. Mounting brackets are commonly included, and the heater is listed for indoor and outdoor use in appropriate installations.
Why this product exists
This model gives contractors and specifiers a compact W-Series infrared heater option for 208V projects that need directional radiant heat and a custom colour finish. Compared with fuel-fired patio heaters, electric infrared heat is commonly chosen where silent operation, no open flame, and architectural integration matter.
Typical guidance only: on 208V systems, heater output is approximately 75% of a 240V-rated equivalent of the same wattage class. Actual comfort and coverage depend on mounting height, wind exposure, layout, and local electrical code.
Compared with similar products
Compared with larger W-Series models, this 2000W unit suits smaller zones and tighter wall or ceiling runs. Compared with dual-element heaters, it offers a simpler single-element format but less total heat output and fewer staged control options.
Specifications
- Brand: Infratech
- Manufacturer part number: W-2028-SS-AL
- Series: W-Series
- Heater type: Single-element electric infrared patio heater
- Rated power: 2000W
- Voltage: 208V
- Current: approximately 9.6A
- Length: 39 in (991 mm)
- Finish: Almond
- Mounting: Wall, ceiling, or recessed installation
- Application: Residential and commercial
- Location rating: Indoor/outdoor use
- Ingress rating: IPX4
- Certifications: UL and cUL listed
- Warranty: 3 years
- Country of manufacture: USA
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.