Infrared Patio Heater · 2000W 240V Single Element · 39 in Stainless Steel Housing · Infratech W-2024-SS
What this product is for
This 240V single-element infrared heater is used to add focused comfort heat to outdoor and semi-exposed spaces such as patios, terraces, covered decks, and restaurant seating areas. The W-Series is Infratech’s basic single-element line for straightforward wall, ceiling, pole, or flush-mount installations.
Use for
Use for residential patios, condo balconies where permitted, covered outdoor kitchens, entry seating areas, and light commercial hospitality spaces. It is commonly selected where a 39 in (991 mm) heater length fits the layout and a 2000W load is appropriate for a smaller zone.
Avoid for
Avoid using this heater as whole-room space heating or where the heated area is fully exposed to strong wind. Do not assume one heater will cover a large open patio; larger spaces often require multiple heaters or higher wattage models.
Best for
Best for smaller seating zones, installations with limited wall space, and projects needing a corrosion-resistant stainless steel housing with low visual impact. It also suits jobs where flush-mount capability or minimal clearance requirements are important.
Installed in
Typically installed on walls, ceilings, poles, or in recessed applications with the appropriate optional frame. Common mounting height guidance for this model family is about 7 to 11 ft (2.1 to 3.4 m), depending on layout and desired heat intensity.
Why this product exists
This heater provides targeted electric infrared heat without propane storage, open flame, or fan-driven air movement. For electricians and contractors, it offers a fixed 240V load of approximately 8.3A and a compact 39 in format for smaller outdoor heating zones.
Typical buying guidance: a 2000W infrared heater is commonly used for a smaller seating area, and some sellers reference about 6 ft x 6 ft (1.8 m x 1.8 m) of comfort coverage in favourable conditions. Actual performance depends on mounting height, ambient temperature, wind exposure, and site layout.
Compared with similar products
Compared with higher-wattage Infratech models, this 2000W unit suits smaller zones and draws less current. Compared with gas patio heaters, it offers silent electric operation and no fuel cylinder handling. Compared with marine-grade versions, this stainless steel model uses 304 stainless steel; marine-grade 316 options are better suited to harsher coastal or salt-air environments.
Specifications
- Brand: Infratech
- Manufacturer part number: W-2024-SS
- Series: W-Series
- Product type: Single-element electric infrared patio heater
- Rated power: 2000W
- Voltage: 240V
- Current draw: approximately 8.3A
- Heater length: 39 in (991 mm)
- Construction: 304 stainless steel
- Finish: Brushed stainless steel
- Mounting options: Wall, ceiling, pole, or flush mount with compatible accessories
- Typical mounting height: 7 to 11 ft (2.1 to 3.4 m)
- Application: Indoor/outdoor rated infrared comfort heating
Rule of thumb: for continuous electric loads, branch-circuit sizing is typically based on 125% of the heater load and must follow the Canadian Electrical Code and local authority requirements.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.