Infrared Patio Heater · 2000W 240V · Single Element Bronze · Infratech W-2024-SS-BR
What this product is for
This electric infrared patio heater is designed to provide directional radiant heat for outdoor or semi-exposed spaces where people are seated or standing nearby. It is part of Infratech’s W-Series single-element line and is suited to residential patios, covered decks, restaurants and light commercial hospitality areas.
Use for
Use for wall or ceiling-mounted outdoor comfort heating in covered patios, pergolas, balconies, entrance areas and similar gathering spaces. The 39 in (1.0 m) body length and 2000W output make it a practical choice where a compact heater is needed on a 240V circuit.
Avoid for
Avoid using this heater where broad-area heating or high mounting heights are required, or where site conditions call for a more corrosion-resistant marine-grade construction. It is also not the right choice when a larger open area needs the higher intensity of a dual-element heater.
Best for
Best for smaller outdoor seating zones, condo or residential patios, and light commercial applications where clean appearance, directional heat and a bronze finish are preferred. Typical buying guidance: a 2000W single-element heater is commonly selected for compact seating areas rather than large open patios. Actual comfort depends on installation conditions, insulation, wind and local electrical code.
Installed in
Commonly installed on exterior walls, ceilings and covered structures at manufacturer-listed mounting heights. Infratech lists W-Series single-element heaters for mounting heights between 6 and 10 ft (1.8 to 3.0 m), with recessed mounting options and short standoffs available where permitted by the installation instructions.
Why this product exists
This heater exists for projects that need focused radiant heat without the footprint of gas-fired patio heating. Infrared heat warms occupants and surfaces directly, which is typically preferred in outdoor comfort-heating applications where convective heat is less effective.
Compared with similar products
Compared with larger W-Series models, this 2000W version uses a shorter 39 in (1.0 m) housing and lower load, which can simplify placement on smaller patios. Compared with Infratech WD-Series dual-element heaters, W-Series single-element models are intended for less intense heat output and lower mounting heights. For coastal or harsh environments, Infratech also offers a Marine UpGrade option on applicable products for enhanced corrosion resistance.
Specifications
- Brand: Infratech
- Manufacturer part number: W-2024-SS-BR
- Series: W-Series
- Product type: Single-element electric infrared patio heater
- Finish: Bronze body with stainless steel trim
- Rated power: 2000W
- Voltage: 240V
- Current: 8.3A
- Heater length: 39 in (1.0 m)
- Approximate overall size shown by distributor listing: 39 x 8 x 3 in (991 x 203 x 76 mm)
- Construction: 304 stainless steel heater construction
- Mounting guidance: typically 6 to 10 ft (1.8 to 3.0 m) mounting height for W-Series single-element heaters
- Application: Outdoor and indoor/outdoor comfort heating, subject to installation instructions
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.