Single Element Infrared Patio Heater · 2000W 240V 39 in (1.0 m) · Biscuit Finish · Infratech W-2024-SS-BI
What this product is for
The Infratech W-2024-SS-BI is a single-element electric infrared patio heater for outdoor living areas and covered commercial spaces where targeted radiant heat is preferred over forced air. It is rated 2000W at 240V and uses a 39 in (1.0 m) heater body in a biscuit finish.
Use for
Use for patios, balconies, verandas, outdoor dining areas, waiting areas and similar spaces where people are seated or standing within the heater's effective radiant zone. This model is commonly selected when wall space is limited and a lower-wattage single-element heater is appropriate.
Avoid for
Avoid using this heater as whole-space heating for large open areas or windy locations where heat retention is poor. It is also not the right choice where a higher-output or multi-heater layout is required to maintain comfort across a wider seating area.
Best for
Best for smaller residential patios and light commercial installations that need a clean-looking electric infrared heater in a custom finish. As a rule of thumb, 2000W models are typically used for compact seating zones rather than large exposed areas. Actual performance depends on mounting height, exposure, wind, surrounding surfaces and local electrical code.
Installed in
Typically installed in covered outdoor areas, patio structures, restaurant terraces and similar locations using manufacturer-approved mounting accessories and clearances. Electricians should size branch circuits and controls to suit a 240V resistive heating load of approximately 8.3A.
Why this product exists
This heater provides focused radiant heat without moving air, making it useful where gas piping is not desired and where a compact electric heater is needed for outdoor comfort. The biscuit body option allows the heater finish to better match lighter architectural surfaces.
Compared with similar products
Compared with larger infrared patio heaters, this 2000W single-element model is shorter and lower in output, making it easier to place in tighter layouts. Compared with dual-element models, it is a simpler option for smaller zones but does not offer the same high/low style control arrangements available on some multi-element systems.
Specifications
- Brand: Infratech
- Manufacturer part number: W-2024-SS-BI
- Series: W-Series
- Product type: Single-element electric infrared patio heater
- Rated power: 2000W
- Voltage: 240V
- Current: approximately 8.3A
- Length: 39 in (1.0 m)
- Finish: Biscuit
- Application: Outdoor or indoor/outdoor covered comfort heating where permitted by installation requirements
- Mounting note: Mounting kit included on some listings; confirm included accessories before ordering
- Trade guidance: For continuous loads, branch-circuit sizing and controls should be selected to suit the connected heater load and installation method.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.