Single Element Infrared Patio Heater · 2000W 240V · Beige Finish · Infratech W-2024-SS-BE
What this product is for
The Infratech W-2024-SS-BE is a single-element electric infrared patio heater for fixed 240V installations where quiet, directional radiant heat is needed. It is suited to residential and light commercial spaces such as patios, terraces, covered decks, restaurant seating areas, and building entrances.
Use for
Use for outdoor living areas, semi-exposed commercial seating, covered balconies, garages, workshops, and other locations where people need direct radiant heat rather than whole-room air heating. The beige finish can be selected where the heater needs to blend with lighter architectural surfaces.
Avoid for
Avoid using this heater as a whole-home or whole-room primary heating source, or where voltage does not match a 240V branch circuit. It is also not the right choice where broad-area heating is required and a higher wattage or multi-heater layout would be more appropriate.
Best for
Best for electricians and contractors specifying a hardwired radiant heater for smaller seating or standing zones. As a rule of thumb, a 2000W electric infrared heater is typically chosen for compact spot-heating applications rather than large open areas. Actual performance depends on mounting height, ambient temperature, wind, surrounding surfaces, and installation conditions.
Installed in
Commonly installed on wall or ceiling mounting points in residential patios, condo balconies, hospitality spaces, and covered exterior areas. Product listings for the W20 series indicate bracketed installation and recessed compatibility on select layouts; confirm mounting clearances and accessories before ordering.
Why this product exists
This heater provides targeted infrared heat without relying on moving air, making it useful where occupants need immediate comfort in outdoor or draft-prone spaces. Electric infrared heaters are commonly selected where clean operation, no open flame, and low visible profile are preferred.
Compared with similar products
Compared with higher-wattage W-Series models, this 2000W version is better suited to smaller zones and tighter layouts. Compared with gas patio heaters, an electric infrared unit avoids fuel storage and open-flame considerations, but requires the correct 240V electrical supply and proper placement for effective coverage.
Specifications
- Brand: Infratech
- Manufacturer part number: W-2024-SS-BE
- Series / family: W Series, single element
- Product type: Electric infrared patio heater
- Rated power: 2000W
- Voltage: 240V AC
- Estimated current at 240V: approximately 8.33A
- Finish: Beige
- Application: Residential and commercial
- Typical installation: Wall or ceiling mounted
- Mounting hardware: Brackets commonly included on distributor listings; verify packout before purchase
- Ingress protection: IPX4 listed on distributor W-Series product pages
- Certifications: UL / cUL shown on distributor listings for W-Series products
- Country of manufacture: USA shown on distributor W-Series listings
Buying note: For continuous-load planning, electricians typically size branch circuits to 80% of breaker rating. At approximately 8.33A, this heater is commonly suitable on a 15A 240V circuit where permitted by code and where no other continuous loads are present. Confirm conductor sizing, controls, and local code requirements before installation.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.