Infrared Patio Heater · 4000W 208V · Single Element Black Slimline · Infratech SL-4028-BK
What this product is for
This electric infrared patio heater is used to add directional comfort heat to outdoor and indoor areas such as restaurant patios, covered decks, pergolas, entrance areas, and similar gathering spaces. It is a 4000W, 208V single-element slimline unit in a black finish for projects where a lower-profile heater is preferred.
Use for
Use for surface-mounted wall or ceiling installations where 208V power is available and focused radiant heat is needed. Common applications include commercial patios, hospitality seating areas, residential outdoor living spaces, and covered work or waiting areas.
Avoid for
Avoid where flush mounting is required, as the SL-Series is intended for surface-mount applications. Also avoid using this heater as whole-room space heating in open or highly exposed areas where wind and heat loss will reduce perceived warmth.
Best for
Best for electricians and contractors specifying a slim single-element infrared heater for covered outdoor zones, especially where black architectural finishes are preferred. This model is commonly selected for mounting heights of approximately 8 to 10 ft (2.4 to 3.0 m).
Installed in
Typically installed on patios, under canopies, on covered balconies, in pergolas, and in other semi-exposed commercial or residential spaces. Minimum and final clearances should always follow the manufacturer installation instructions and local electrical code.
Why this product exists
This heater provides targeted radiant heat without relying on moving air, making it useful where occupants need direct warmth rather than full ambient space heating. The slimline anodized aluminium body helps reduce visual bulk compared with larger heater styles.
Compared with similar products
Compared with larger dual-element patio heaters, this single-element model offers a narrower profile and simpler layout for smaller heating zones. Compared with gas patio heaters, it provides electric infrared heat with no on-site combustion. As a rule of thumb, 208V systems deliver lower output than equivalent 240V heater versions, so model voltage should match the project power supply and design intent. Actual comfort depends on mounting height, wind, enclosure, and layout.
Specifications
- Brand: Infratech
- Manufacturer part number: SL-4028-BK
- Series: SL-Series Slimline
- Product type: Single-element electric infrared patio heater
- Wattage: 4000W
- Voltage: 208V
- Current: approximately 19.2A
- Finish: Black
- Housing material: Anodized aluminium
- Length: 63.5 in (1613 mm)
- Width: 4.75 in (121 mm)
- Application: Indoor or outdoor comfort heating
- Mounting: Surface wall or ceiling mount
- Typical mounting height: 8 to 10 ft (2.4 to 3.0 m)
- Typical heated area: approximately 100 sq ft (9.3 sq m)
- Ingress rating: IPX4
- Warranty: 3 years
- Country of manufacture: USA
Typical coverage figures are application guidance only. Actual performance depends on installation conditions, insulation, wind exposure, mounting height, and local electrical code.
Minimum Order $20
We accept the following payment methods:

Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.
Related products
- Available to Order | Typically Arrives in 1 - 3 Weeks From California USA2147 – Loyalty Rewards
Solid State Relay Panel · 4 Relay / 4 Zone Control · Surface Mount · Infratech 30-4054
30-4054
Available to Order | Typically Arrives in 1 - 3 Weeks From California USA3616 – Loyalty Rewards






