Electric Infrared Patio Heater · 3000W 208V · Single Element Slimline 63.5 in (1613 mm) · Infratech SL-3028
What this product is for
This is a fixed-mount electric infrared patio heater for outdoor living and light commercial spaces that need directional radiant heat without gas piping. The Infratech SL-3028 is a single-element Slimline model rated 3000W at 208V with a 63.5 in (1613 mm) housing.
Use for
Use for covered patios, pergolas, restaurant seating areas, balconies, terraces, and similar outdoor zones where people are seated or standing within the heater's intended throw. It is commonly selected where a narrower heater body is preferred and where 208V power is already available.
Avoid for
Avoid using this heater as whole-space air heating or for large open areas with significant wind exposure. It is also not the right choice where a 240V heater is required to match an existing design load or control scheme.
Best for
Best for projects needing a slim single-element infrared heater with 208V supply, including residential patios and light commercial hospitality applications. A typical buying rule of thumb is to use radiant heaters for occupant-focused spot heating rather than trying to warm the surrounding air.
Installed in
Typically installed in covered outdoor structures, patio ceilings, wall-mount layouts, pergolas, and commercial exterior seating areas. Actual placement, clearances, and controls should follow the manufacturer's installation instructions and local electrical code.
Why this product exists
This model exists for projects that need Infratech's Slimline form factor in a 3000W, 208V single-element configuration. It provides electric infrared comfort heat where clean appearance, fixed mounting, and compatibility with 208V building power are key selection factors.
Compared with similar products
Compared with larger dual-element patio heaters, this single-element unit is a simpler option for smaller heating zones and narrower mounting locations. Compared with 240V versions, a 208V heater is commonly used in commercial buildings with 208V service; output and perceived coverage should be reviewed as part of the heater layout. Some distributor listings indicate approximately 8 x 8 ft (2.4 x 2.4 m) coverage, but actual performance depends on mounting height, weather exposure, insulation, layout, and local electrical code.
Specifications
- Brand: Infratech
- Manufacturer part number: SL-3028
- Series: Slimline / SL-Series
- Product type: Electric infrared patio heater
- Element configuration: Single element
- Power rating: 3000W
- Voltage: 208V
- Current draw: 14.4A
- Length: 63.5 in (1613 mm)
- Approximate dimensions: 63.5 x 4.75 x 3 in (1613 x 121 x 76 mm)
- Application: Outdoor radiant comfort heating
- Typical use areas: Patios, decks, pergolas, terraces, restaurant seating
Estimated application guidance only: heater coverage varies with mounting height, wind, ambient temperature, and site conditions.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
Standard Shipping-Free on orders over $500 in Metropolitan Areas / Subject to $750 in Rural Areas.
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998(Updated August 2026)
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.