Infrared Radiant Heater · 1600W 240V · Single Element Black Slimline · Infratech SL-1624-BK
What this product is for
This electric infrared radiant heater is used to add targeted comfort heat to patios, balconies, garages, workshops, enclosed outdoor rooms, and other spaces where a low-profile surface-mount heater is preferred. It is a single-element Infratech SL-Series unit with a black Slimline Shadow finish.
Use for
Use for wall or ceiling mounting where 240V power is available and a narrow-profile heater is needed. Common applications include covered patios, pergolas, restaurant seating areas, garages, and indoor commercial or residential spaces needing directional radiant heat.
Avoid for
Avoid using this heater as whole-room space heating for large open areas, or where exposure conditions exceed the manufacturer installation requirements. It is not the right choice when broad-area heating coverage or higher watt density is required.
Best for
Best for smaller seating zones and compact mounting locations where a 29.5 in (750 mm) heater length and black finish fit the project. This model is also a practical choice when the installation calls for a single-element heater with available on/off, input regulator, or custom control options.
Installed in
Typically installed on walls or ceilings at approximately 6 to 7 ft (1.8 to 2.1 m) mounting height. As a rule of thumb, the published comfort zone is about 5 x 5 ft (1.5 x 1.5 m). Indoor or well-protected spaces may feel warmer than average, while windy or exposed areas may require additional heaters. Actual performance depends on installation conditions, layout, and local electrical code.
Why this product exists
This model exists for projects that need focused radiant heat without the bulk of larger dual-element heaters. The anodized aluminium housing, narrow profile, and black finish help it blend into architectural applications while still delivering 1600W of infrared heat at 240V.
Compared with similar products
Compared with higher-wattage SL-Series models, this 1600W version is better suited to smaller zones and lower mounting heights. Compared with broader-area heaters, it uses less circuit capacity at 6.7A, which can simplify branch-circuit planning for smaller comfort-heat applications.
Specifications
- Manufacturer part number: SL-1624-BK
- Brand: Infratech
- Series: SL-Series Slimline
- Product type: Single-element electric infrared radiant heater
- Finish: Black
- Power: 1600W
- Voltage: 240V
- Current: 6.7A
- Length: 29.5 in (750 mm)
- Approximate heat coverage: 5 x 5 ft (1.5 x 1.5 m)
- Typical mounting height: 6 to 7 ft (1.8 to 2.1 m)
- Mounting: Wall or ceiling mount
- Mounting angle: 0 to 60 degrees
- Housing: Anodized aluminium
- Use location: Indoor and outdoor
- Listing: UL listed; cUL/CE noted by manufacturer family page
- Controls: Compatible with on/off switch, input regulator, and custom controls
- Element life: Approximately 5000 hours
- Warranty: 3 years
- Country of manufacture: USA
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.