Solid State Relay Panel · 1 Zone · 9,000W at 240V / 8,000W at 208V · Infratech 30-4051
What this product is for
This solid state relay panel is used to control one zone of compatible Infratech electric infrared heaters when paired with an Infratech analog remote control assembly. It is intended for projects that need a dedicated relay panel for switching heater loads within the manufacturer’s rated capacity.
Use for
Use for 240V systems up to 9,000W or 208V systems up to 8,000W. Suitable for residential and light commercial patio heating layouts where one heater zone needs centralised relay control in a weather-resistant enclosure.
Avoid for
Avoid using this panel as a standalone controller, for multi-zone layouts, or where a different Infratech control platform is required. Do not exceed the manufacturer’s voltage and wattage limits.
Best for
Best for single-zone Infratech heater installations where electricians need a factory-matched relay panel with pre-assembled internal components, breaker protection, and a NEMA 4/12 enclosure.
Installed in
Commonly installed in covered patios, outdoor hospitality spaces, residential outdoor living areas, and similar heating control applications. The enclosure is listed as NEMA 4/12 for indoor or outdoor locations where weather resistance is required.
Why this product exists
This panel provides a project-specific solid state switching solution for Infratech heating systems, helping separate control functions from the heater load while supporting compatible analog control assemblies. Solid state design also reduces the mechanical wear associated with contact-based switching.
Compared with similar products
Compared with larger Infratech relay panels, this model is the 1-relay, 1-zone option for smaller layouts. A practical rule of thumb is to confirm total connected heater wattage per zone before selecting the panel. Actual load planning depends on heater model, branch circuit design, installation conditions, and local electrical code.
Specifications
- Manufacturer: Infratech
- Part number: 30-4051
- Product type: Solid state relay panel
- Zones/relays: 1 zone / 1 relay
- Compatibility: For use with Infratech analog remote control assembly
- Maximum load: 9,000W at 240V
- Maximum load: 8,000W at 208V
- Enclosure rating: NEMA 4/12
- Listing: UL 508 listed control panel
- Breaker type: UL 489 breakers
- Interior dimensions: 16 in H x 12 in W x 6 in D (approximately 406 x 305 x 152 mm)
- Construction details: Pre-assembled panel with custom aluminium heat sink and terminal block
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.