On/Off Switch Assembly · Single Surface Mount · Weatherproof Cover and Gang Box · Infratech 14-4420
What this product is for
The Infratech 14-4420 is a single on/off switch assembly for controlling compatible Infratech single-element radiant heaters. It is built for surface-mount installation and includes a weatherproof cover and gang box for exposed outdoor areas.
Use for
Use for patios, restaurant terraces, covered outdoor seating areas, and other exterior heater installations where a simple local on/off control is required. It is commonly used with Infratech C-Series, SL-Series, and W-Series heaters.
Avoid for
Avoid using this control where variable heat adjustment is required, or where the connected load exceeds 20A on a single switch. Do not use it as a multi-heater control unless the installation is specifically engineered within the switch rating and local code.
Best for
Best for straightforward single-heater switching in outdoor residential and light commercial installations where weather exposure and clean surface mounting matter.
Installed in
Typically installed on exterior walls, posts, or other accessible mounting surfaces near the heater control point. The assembly is intended for exposed outdoor locations and surface-mount applications.
Why this product exists
This switch assembly provides a simple, code-conscious way to add local on/off control for compatible Infratech heaters without moving to more complex control packages. For many single-heater layouts, a basic switch is the practical choice when only full on/off operation is needed.
Typical guidance only: each heater commonly has its own dedicated on/off switch in simple installations. Actual control design depends on heater model, branch circuit, overcurrent protection, installation conditions, and local electrical code.
Compared with similar products
Compared with flush-mount switch options, this model is intended for surface mounting and includes the weatherproof box and cover for exposed locations. Compared with input regulators or custom control systems, it offers basic on/off operation only, with lower complexity for suitable single-heater applications.
Specifications
- Manufacturer part number: 14-4420
- Brand: Infratech
- Product type: Single on/off switch assembly
- Mounting: Surface mount
- Enclosure: Weatherproof cover and gang box
- Electrical rating: 120 to 277 VAC
- Maximum switch rating: 20A
- Compatibility: Infratech single-element heaters; commonly listed for C-Series, SL-Series, and W-Series
- Application: Exposed outdoor areas
- Approximate dimensions from reseller listings: 5.5 in x 3.63 in x 2.25 in (140 x 92 x 57 mm)
- Country of manufacture: USA
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.