Dual Flush-Mount On/Off Switch · 120/277 VAC · Weatherproof Cover · Infratech 14-4415
What this product is for
The Infratech 14-4415 is a dual flush-mount on/off switch assembly with a weatherproof cover for controlling compatible single-element infrared heaters. It is intended for in-wall installation where a cleaner finished appearance is preferred and the control location is exposed to outdoor conditions.
Use for
Use this control with compatible Infratech single-element heater installations in residential patios, restaurant terraces, covered outdoor amenity spaces, and light commercial exterior heating zones. It is rated for 120/277 VAC and 20A maximum per switch.
- Outdoor heater control points requiring a weatherproof cover
- Flush in-wall installations instead of surface-mounted boxes
- Projects using separate switching for individual heater circuits
Avoid for
Avoid using this product where dimming or variable heat control is required, or where the heater application calls for a different Infratech control family such as an input regulator, duplex stack switch, or contactor-based control package. Do not exceed the electrical rating of the switch assembly.
Best for
Best for electricians and contractors specifying a straightforward on/off control for outdoor infrared heaters where appearance, weather protection, and manufacturer-matched accessories matter.
Installed in
Typically installed in exterior walls, patio columns, outdoor kitchen structures, and other finished wall locations serving radiant heater zones. The weatherproof cover is intended for exposed outdoor areas.
Approximate overall cover size is 5-1/2 in x 5-1/2 in x 1-1/4 in (140 x 140 x 32 mm). Approximate gang box size is 4-3/4 in x 4-3/4 in x 2-1/4 in (121 x 121 x 57 mm).
Why this product exists
This switch assembly provides a simple low-cost control option for compatible Infratech heater circuits while maintaining a more finished flush-mount look. For many outdoor heater layouts, a basic on/off control is the practical choice when staged heat control is not required.
Typical guidance: each heater commonly has its own dedicated on/off control point in simple switched installations. Actual control design depends on heater model, load, voltage, and local electrical code.
Compared with similar products
Compared with a surface-mount weatherproof control, this flush-mount version gives a cleaner built-in appearance but requires in-wall rough-in space. Compared with input regulators or more advanced control packages, this model is for straightforward on/off switching rather than variable output control.
Specifications
- Manufacturer: Infratech
- Part number: 14-4415
- Product type: Dual flush-mount on/off switch with weatherproof cover
- Application: In-wall for exposed outdoor areas
- Electrical rating: 120/277 VAC
- Current rating: 20A maximum per switch
- Typical heater use: Compatible with Infratech single-element heaters
- Approximate weatherproof cover dimensions: 5-1/2 in H x 5-1/2 in W x 1-1/4 in D (140 x 140 x 32 mm)
- Approximate gang box dimensions: 4-3/4 in H x 4-3/4 in W x 2-1/4 in D (121 x 121 x 57 mm)
- Approximate stainless steel plate dimensions: 4-3/8 in x 4-3/8 in (111 x 111 mm)
- Country of manufacture: USA
- Warranty: 3-year manufacturer warranty
Typical load guidance from distributor listings indicates approximately 3000W maximum per switch at 208/220 VAC and approximately 4000W maximum per switch at 240/277 VAC. This is application guidance only; actual performance depends on connected load, installation conditions, and local electrical code.
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.