Dual INF Input Regulator Wall Plate · 240V · Stainless Steel Deep Gang Box · Infratech 14-4205
What this product is for
The Infratech 14-4205 is a dual stainless steel wall plate with deep gang box for INF input regulator assemblies. It is used as an in-wall mounting option for Infratech heater controls in protected residential or commercial installations.
Use for
Use for mounting dual INF input regulator controls on compatible Infratech heating systems. This configuration is listed for 240V regulator assemblies and a maximum 15A load. It is commonly selected where two heater control points are needed in one finished wall location.
Typical buying guidance: INF input regulators are intended for single-element heaters and cycle the heater on and off when not set to full power rather than dimming output continuously. Actual control performance depends on heater model, wiring layout, and installation conditions.
Avoid for
Avoid using this wall plate assembly where a weatherproof cover or surface-mount box is required, or where the control load exceeds 15A. It is also not the correct choice for dual-element heater switching where duplex or stack switch assemblies are specified instead.
Best for
Best for covered patio heater control installations, hospitality spaces, outdoor living areas with protected wall locations, and projects that need a stainless steel in-wall finish with room for wiring in a deep gang box.
Installed in
Installed in wall cavities or finished wall assemblies in protected areas. The deep gang box format provides additional wiring space compared with a shallow box, which can help on control terminations and cleaner device fitment. Confirm box depth, conductor fill, and local code requirements before installation.
Why this product exists
This product provides a factory-matched in-wall mounting solution for Infratech INF input regulator controls. It gives contractors a cleaner finished appearance than field-mixing plates and boxes, while matching the intended control family and mounting style.
Compared with similar products
Compared with Infratech 14-4215, this model is the in-wall stainless steel wall plate and deep gang box version rather than the flush-mount weatherproof cover version. Compared with 14-4225, it is not the surface-mount weatherproof box version. Compared with 14-4305 duplex/stack switch assemblies, the 14-4205 belongs to the INF input regulator family and is used for single-element heater control up to 15A maximum.
Specifications
- Brand: Infratech
- Manufacturer part number: 14-4205
- Product type: Dual stainless steel wall plate with deep gang box
- Control family: INF input regulator assembly
- Configuration: Dual
- Mounting style: In-wall / wall plate with deep gang box
- Finish: Stainless steel
- Voltage: 240V listed configuration
- Maximum current: 15A
- Application: Compatible with INF input regulator installations for single-element heaters
- Alternate availability note: Also available in 120V versions within the control family; verify exact part number before ordering
- Installation note: For protected areas; verify suitability for indoor or covered outdoor locations and local electrical code
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.