Solenoid Voltage Tester · 100-600V AC/DC · LoZ with vibration alert · IDEAL 61-065
What this product is for
The IDEAL 61-065 is a solenoid voltage tester used to verify the presence of AC or DC voltage on electrical circuits from 100 to 600V. It is built for electricians, service technicians, and maintenance staff who want a direct-contact tester with low impedance for more dependable live/dead checks on typical building power systems.
Use for
Use it for troubleshooting branch circuits, panels, receptacles, switches, contactors, and other 100-600V AC/DC electrical points. The low-impedance design is commonly used to reduce misleading induced or ghost voltages, and the vibration alert helps confirm AC voltage in noisy or low-light work areas.
Avoid for
Avoid using this tester where you need an exact numeric voltage reading, continuity measurement, or non-contact detection. It is also not the right choice for low-voltage control work below its stated operating range.
Best for
Best for electricians who prefer a traditional solenoid-style tester for quick go/no-go voltage checks on commercial, industrial, and residential service work. It suits buyers who want CAT III 600V rating, replaceable leads, and a tester that helps filter out ghost voltage.
Installed in
This is a hand tool, not a permanently installed device. Commonly carried in service bags, maintenance carts, and contractor tool kits for field diagnostics across residential, commercial, and light industrial sites in Canada.
Why this product exists
This tester exists for tradespeople who need a simple, direct-contact voltage check without relying on a full multimeter. Compared with high-impedance meters, a low-impedance tester is typically preferred when verifying whether a conductor is truly energized rather than carrying an induced reading. Actual results depend on circuit conditions, installation layout, and safe testing procedure.
Compared with similar products
Compared with a digital multimeter, this tester is faster for basic live voltage checks but does not provide a precise numerical display. Compared with a non-contact tester, it requires direct probe contact but gives a more definitive indication on many troubleshooting tasks. Compared with basic neon testers, it adds low impedance, vibration alert, shielded replaceable leads, and CAT III 600V rating.
Specifications
- Product type: Solenoid voltage tester
- Voltage range: 100-600V AC/DC
- Safety rating: CAT III 600V
- Indication: Bright LED and neon indicator
- AC alert: Vibration indication when AC voltage is present
- Lead style: Replaceable test leads with shielded probe tips
- Compliance: IEC 61010-031 compliant probe tips
- Design feature: Low impedance (LoZ) to help eliminate ghost voltages
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Included with some listings: tester, standard leads, batteries, carrying case/manual may vary by seller
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.