GFCI Circuit Tester · 120V AC 3-Wire Receptacles · Built-In GFCI Trip Test · IDEAL 61-051
What this product is for
The IDEAL 61-051 E-Z Check® Plus is a plug-in circuit tester used to verify wiring condition on 120V AC 3-wire receptacles and to trip-test GFCI-protected outlets. It gives a quick visual indication of common wiring faults during service calls, renovations, inspections, and troubleshooting.
Use for
- Testing standard 120V AC grounded receptacles
- Checking GFCI receptacles and downstream protected outlets
- Identifying common faults such as open ground, open neutral, open hot, reverse polarity, hot on neutral, and hot/ground reverse with open hot
- Fast plug-in verification before energizing connected equipment
Avoid for
- 240V receptacles
- Ungrounded 2-wire receptacles
- Detailed voltage, impedance, or load analysis
- Confirming circuit de-energization before touch work; use an approved meter and safe work practices
Best for
Electricians, maintenance staff, service contractors, and inspectors who need a fast pass/fail style check on 15A and 20A, 120V branch-circuit receptacles. This style of tester is commonly used for quick troubleshooting, while a meter or circuit analyser is typically used when deeper diagnosis is required.
Installed in
Used on receptacles installed in homes, apartments, offices, retail spaces, and light commercial buildings across Canada. Typical applications include kitchens, bathrooms, basements, garages, and outdoor receptacle circuits where GFCI protection is used.
Why this product exists
This tester speeds up outlet checks by combining fault indication and GFCI trip testing in one handheld plug-in tool. For service electricians, it helps reduce time spent opening devices for basic fault screening and provides a quick first check before moving to meter-based troubleshooting.
Compared with similar products
Compared with a basic 3-light receptacle tester, this model adds a built-in GFCI test function. Compared with a full circuit analyser, it is simpler and faster to use but does not provide advanced readings such as voltage drop or impedance. As a rule of thumb, plug-in testers are best for quick screening rather than complete diagnosis. Actual results depend on receptacle wiring, GFCI type, and installation conditions.
Specifications
- Product type: E-Z Check® Plus GFCI circuit tester
- Manufacturer part number: 61-051
- Brand: IDEAL
- Voltage rating: 120V AC
- Receptacle type: 3-wire grounded receptacles
- Function: Receptacle wiring fault indication and GFCI trip test
- Indication method: Light pattern fault display
- Detects: Open ground, reverse polarity, open hot, open neutral, hot on neutral, and hot/ground reverse with open hot
- Warranty: 2-year limited warranty
- Typical application: Residential and light commercial receptacle testing
Minimum Order $20
We accept the following payment methods:
Credit Card can offer cardholders convenience, security, rewards, and the opportunity to build a healthy credit history.
Click here for Contractor Cash Account
Trade Credit is a standard financing option for contractors and construction companies to obtain supplies and keep their projects moving. We offer 30-day credit terms to trade contractors on approved applications only.
Click here for Contractor Credit Account 
(Contractor Accounts)
Standard Shipping-Free on orders over $249 in Metropolitan Areas / $499 in Rural Areas
(All Other Accounts)
Standard Shipping-Free on orders over $499
Minimum Order Is $20
Freight Surcharge Apply To Oversized/Over-Weight Items(Not Limited To):
- PVC and EMT Pipe
- Wire and Cable
- Items over 48 inches in length
Surcharges are applied to items on an individual basis regardless if the rest of the order meets prepaid levels. If a freight line appears at the time of check out it only applies to the Items carrying a surcharge and not the entire basket of goods.
Shipping Options:
- A courier can deliver to your home, office, or your job site
- Pick up at local depot near you (applies to the following locations)
Edmonton Warehouse 8135 Roper Rd Edmonton, T6E 6S4, AB
Burnaby Warehouse 5608 Goring St Burnaby, V5B 3A3, BC
Orders are typically delivered within two to eleven business days. The transit time begins the first full shipping day after your order leaves our warehouse. Please allow an additional 2-5 days for delivery to remote locations, additional fees may apply.
THE FOLLOWING APPLIES TO STANDARD SHIPPING OPTIONS
- We cannot deliver to P.O. boxes.
- A signature may be required for shipments over $500.
- No weekend delivery.
- Wire & cable, EMT or PVC conduit, tube lamps 4ft or greater, and 10ft ground rods & mast pipes have special conditions.
Standard Shipping cost on orders less than $499
Total shipping cost = "Per Shipment" cost + "Per Item" cost. The "per item" cost is listed in terms of price per pound.
Product Group | Per Shipment* | Per Item |
|---|---|---|
Boxes | $6.99 | $1.49/lb |
Conduit & Raceway | $149.99 | $2.49/lb |
Connectors & Fittings | $5.99 | $1.19/lb |
Data & Structured Home | $5.99 | $1.19/lb |
Distribution Equipment | $5.99 | $1.19/lb |
Emergency Lighting | $6.99 | $1.49/lb |
Heating & Ventilation | $6.99 | $1.49/lb |
Lighting Controls | $5.99 | $1.19/lb |
Lighting Indoor | $6.99 | $1.49/lb |
Lighting Outdoor | $6.99 | $1.49/lb |
Tools | $4.99 | $.99/lb |
Wire & Cable | $49.99 | $2.29/lb |
Wiring Devices | $5.99 | $1.19/lb |
Any combination of the above items | Highest applicable per-shipment charge | As above |
Effective Date: August, 15, 1998
At Evolt Electrical Supply, customer satisfaction is our top priority. Please review our return policy below:
Returns
Defective Items:
- If you receive a defective item, you may return it for a replacement or refund within 30 days of purchase.
- To initiate a return, please contact our customer service team with your order number and a description of the defect.
Non-Defective Items:
- We do not accept returns for non-defective items. All sales are final once the product is shipped or ordered from the manufacturer. In certain circumstances we may amend this so feel free to contact our customer service team.
Return Process
Authorization:
- Before returning any items, you must obtain a Return Merchandise Authorization (RMA) number from our customer service team. Returns without an RMA number will not be accepted.
- Backordered items can not be cancelled if the item is in transit from the manufacturer, contact us to review.
Shipping:
- Customers are responsible for the return shipping costs. We recommend using a trackable shipping service or purchasing shipping insurance.
Condition:
- Returned items must be in their original packaging and condition. Any items returned damaged due to improper packaging or misuse will not be eligible for a refund or replacement.
Refunds
- Once we receive and inspect your returned item, we will notify you of the approval or rejection of your refund.
- Approved refunds will be processed within [7] business days and a credit will automatically be applied to your original method of payment.